# parts

moduleID: 1e03b5a5-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 7 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.7pins
path: obsolete/mystery_part7.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 7 pins on a 100 mil inline pin header footprint.


moduleID: 145b5412a0ffbe91a876166139419e15
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2sx
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2sx.fzp
description:
The BASIC Stamp 2sx serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: jlpcb-104
family: prototyping board (jeelabs)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Jean-Claude Wippler
title: JeePlug experimenter's board
date: 2011-12-04
path: core/jlpcb-104.fzp
description:
The JeePlug is a general-purpose mini-board which "happens" to be particularly convenient for use with "ports". It's a small 8 x 10 hole prototype board for simple interconnect tasks to components and connectors.


moduleID: mp3-trigger-v22
family: audio playback
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: MP3 Trigger
date: 2011-07-08
path: core/mp3-trigger-v22.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>Created in collaboration with Jamie Robertson, the MP3 Trigger is quite possibly the most versatile, low-cost, low power embedded MP3 Player. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control. The board plays the MP3 files directly from a FAT16 microSD flash card and supports 192Kbps stereo playback. There is also an on-board navigation switch for local access and playback of all MP3 tracks on the flash card.</p>


<p>


	New for version 2: Aside from more than doubling the number of trigger inputs, the MP3 Trigger v2 now contains a resident bootloader that enables firmware updates directly from the microSD card without requiring a hardware programmer. The <a href="http://www.cypress.com/?id=2522" target="_blank">PSoC Designer IDE</a> can be used to generate hex files for the bootloader. See the datasheet below for more details on how to use the bootloader.</p>


<p>


	Firmware version 2&nbsp;also incorporates &ldquo;Quiet Mode&rdquo;, a new feature&nbsp;that can be enabled via the serial control port. In this mode, the triggers don&rsquo;t start tracks directly, but instead produce a serial message indicating which triggers were activated. A host microcontroller (<a href="http://www.sparkfun.com/commerce/product_info.php?products_id=666" target="_blank">Arduino</a>, for example) can thus monitor the trigger inputs and then start any track or sequence of tracks via the serial control port, making the triggers much more flexible.</p>


<p>


	The board uses a Cypress PSoC CY8C29466-24SXI microcontroller and a VLSI VS1053 audio codec.</p>


<p>


	Board can be powered by an external wall wart, FTDI Basic, or raw 3.3V input (see related items below).</p>


<p>


	<strong>Firmware update 2.40 Beta:</strong> Check it out <a href="http://makerjam.com/mp3-trigger/mp3-trigger-firmware-version-2-40-beta/" target="_blank">here</a> and be sure to leave feedback on the blog post.</p>


<p>


	<strong>Firmware update 2.23: compatible with 192kbps audio.</strong></p>


<p>


	We use the most up-to-date firmware on everything we ship out. However, if you have an older v2.xx model (or want to change the baud rate) and wish to have the newest firmware, you can get it <a href="http://makerjam.com/support/" target="_blank">here</a>.</p>


<p>


	Instructions on how to update your v2.xx firmware are in the <a classname="" href="http://www.sparkfun.com/datasheets/Widgets/MP3Trigger/MP3TriggerV2UserGuide_2010-07-30.pdf" target="_blank">datasheet</a>, but here&rsquo;s a quick review:</p>


<ol>


	<li>


		Download and unzip one of the files above.</li>


	<li>


		Copy the resulting hex file to a microSD card and rename it to: &ldquo;MP3TRIGR.HEX&rdquo;. It does not need to be the only file on the card &ndash; it just&nbsp;needs to have that&nbsp;precise filename.</li>


	<li>


		Insert the microSD card into your MP3 Trigger V2 and turn the power on while holding down the center navigation switch.</li>


	<li>


		Wait for the Status LED to go solid, then cycle the power. You&rsquo;re now running the new firmware.</li>


</ol>


<p>


	Please refer to the datasheet for a more detailed description of the Status LED indications when running the bootloader.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Input voltage: 4.5-12VDC</li>


	<li>


		Current Consumption: 45mA idle, 85mA playing</li>


	<li>


		File system: FAT16</li>


	<li>


		Audio out: line level stereo (1/8&quot; stereo jack), see app note below if connecting to larger stereo jack</li>


	<li>


		Trigger inputs: 3.3-5V, active low inputs with internal pull-ups</li>


	<li>


		Serial: Full duplex, 8N1, 38.4K baud</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Widgets/MP3Trigger/MP3TriggerV2UserGuide_2010-07-30.pdf" target="_blank">Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Widgets/MP3Trigger/mp3-trigger-v21i.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/MP3Trigger/vs10XXan_output.pdf">VLSI Application Note for protecting analog outputs</a></li>


	<li>


		<a href="http://makerjam.com/support/" target="_blank">Firmware Files</a></li>


</ul>


moduleID: HMC6352-v18
family: magnetometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Compass Module - HMC6352
date: 2011-07-08
path: core/HMC6352-v18.fzp
description:
<p>


	<b>Description:</b> This is a very simple breakout board for the popular HMC6352. Remember the KISS mantra? We really enjoy the simplicity and ease of use with the HMC6352. If you need simple, clean, degree resolution compass heading, this is the way to go.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Simple I2C interface</li>


	<li>


		2.7 to 5.2V supply range</li>


	<li>


		1 to 20Hz selectable update rate</li>


	<li>


		True drop-in solution</li>


	<li>


		0.5 degree heading resolution</li>


	<li>


		1 degree repeatability</li>


	<li>


		Supply current : 1mA @ 3V</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:<br />


	</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC6352-v16.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/HMC6352.pdf" target="_blank">HMC6352 Datasheet</a></li>


	<li>


		<a href="http://www.ssec.honeywell.com/magnetic/hmc6352.html" target="_blank">Honeywell Product Page</a></li>


	<li>


		<a href="../../../../Code/LPC2138_Test_IIC.zip" target="_blank">Example I2C project</a></li>


	<li>


		<a classname="" href="http://wiring.org.co/learning/libraries/hmc6352sparkfun.html" name="" target="_blank">Wiring Example</a></li>


	<li>


		<a classname="" href="http://lusorobotica.com/index.php/topic,36.0.html" name="" target="_blank">Example project</a> in Portuguese - Thanks Tiago!</li>


	<li>


		<a href="http://www.youtube.com/watch?v=sBKHdt0OdPg" target="_blank">Digital Compass How-To Video</a></li>


	<li>


		<a href="http://mbed.org/cookbook/HMC6352-Digital-Compass" target="_blank">mbed Example</a></li>


	<li>


		<a href="http://bildr.org/2011/01/hmc6352/">Bildr Tutorial</a></li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 0.6x0.6&quot; (15x15mm)</p>


moduleID: b7c86ac27f1d86eafa64253206dff603
family: microcontroller board (wiring)
fritzingversion: 0.6.2b.07.11.5217
author: Brett Hagman, Rogue Robotics, bhagman@roguerobotics.com, http://www.roguerobotics.com/
title: Wiring S
label: WiringS
date: 2011-07-20
path: core/Wiring_S.fzp
description:
An open source hardware platform based on the Atmel ATmega644P(A) microcontroller.  Programmable and powered via USB.  Can also be powered by external power supply.









http://wiring.org.co/


moduleID: cb9c6041c0b15c9c1a63560527d7693a
fritzingversion: 0.3.14b.12.23.3905
author: nvillar
title: Peppermill Power Board
label: Peppermill Power Board
date: 2010-02-05
path: contrib/Peppermill Power Board.fzp
description:
The Peppermill Power Board (PPB) lets you turn a geared DC motor into a human-powered device.  It also doubles as a sensor that provides information about the direction and rate of turn. 



HOW TO USE



Attach the terminals of a geared DC motor to the grey connector.  Use the white switch to select the maximum operating voltage for your target circuit (2.5, 3.3 or 5.0 Volts), and connect the PPB to your target circuit using the header pins. The pins labelled V+ and GND provide a regulated power supply, and pins Speed and Direction can be connected to analog inputs on a microcontroller. 



The PPB has a built-in PIC microcontroller and an array of LEDs to provide instant feedback about the direction and rate of turn. To use this feature, set the black switch to CAL (Calibrate). Give the motor a quick turn, until you see the LEDs light up briefly. Set the switch to RUN, and when you turn the motor the LEDs should light up in a sequence that matches the direction and rate of turn. 


moduleID: USBHostShield-v13
family: usb shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino USB Host Shield
date: 2011-07-08
path: core/USBHostShield-v13.fzp
description:
<p>


	<strong>Description:&nbsp; </strong>This new version corrects the pin out for the GPX and RESET pins. The USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB slave device - thumbdrives, digital cameras, bluetooth dongles, and much more!</p>


<p>


	A four-wire serial interface is used to communicate with the host controller chip, so the shield connects the Arduino&#39;s hardware SPI pins (D10-13) to the MAX3421E. A USB type A female connector is wired up to the IC, and it also supplies 5V as any normal USB port would.</p>


<p>


	The Host Shield takes its power from the &#39;Vin&#39; pin on your Arduino. Power from that pin is regulated to both 5V and 3.3V on the shield. All SPI signals are sent through a hex converter to step them down to 3.3V.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/USBHostShield-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/USBHostShield-v13.zip">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MAX3421E.pdf" target="_blank">Datasheet</a> (MAX3421E)</li>


	<li>


		<a href="http://www.circuitsathome.com/arduino_usb_host_shield_projects" target="_blank">Projects and Code</a> (Thanks Oleg!)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9628" target="_blank">DEV-09628</a></p>


moduleID: LSM303 breakout board-v11
family: magnetometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LSM303 Breakout Board - Tilt Compensated Compass
date: 2011-07-08
path: core/LSM303 breakout board-v11.fzp
description:
<p>


	<strong>Description:</strong> The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor. This breakout board uses the LSM303DLH to give a you the data you need to feed into a microcontroller and calculate tilt-compensated output.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		+- 2/4/8 g dynamically selectable full-scale</li>


	<li>


		+-1.3 to +- 8.1 gauss magnetic field full-scale</li>


	<li>


		16-bit data out</li>


	<li>


		I2C interface</li>


	<li>


		Embedded self-test</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Magneto/LSM303%20breakout%20board-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Magneto/LSM303 breakout board-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Magneto/LSM303%20Datasheet.pdf" target="_blank">Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Magneto/Tilt%20Compensated%20Compass.pdf" target="_blank">Application Notes</a></li>


</ul>


moduleID: Mainboard-v18
family: arduino
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Arduino Main Board
date: 2011-07-08
path: core/Mainboard-v18.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! We now use a surface mount programming connector to keep the header from poking through.<br />


	<br />


	This version of the LilyPad now uses the new ATmega328 at 8MHz. Arduino 0016 supports the Arduino Pro Mini 328/8MHz. Use this setting when using this new LilyPad 328.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	Can&#39;t decide which Arduino is right for you? <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=148" name="" target="">Arduino buying guide</a>!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		50mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://web.media.mit.edu/%7Eleah/LilyPad/" name="" target="_blank">Leah Buechley&#39;s LilyPad Tutorial</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/Mainboard-v18.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.atmel.com/dyn/resources/prod_documents/8271S.pdf" target="_blank">ATmega328 Datasheet</a></li>


	<li>


		<a href="http://www.arduino.cc/en/Main/ArduinoBoardLilyPad" target="_blank">LilyPad Arduino Documentation</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Mainboard-v18.zip" name="" target="_blank">LilyPad Eagle Files</a> released under <a href="http://creativecommons.org/licenses/by-sa/3.0/" target="_blank">Creative Commons License</a></li>


</ul>


moduleID: Mega_Shield-v13
family: prototype shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Mega Proto Shield
date: 2011-08-10
path: core/Mega_Shield-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The Arduino Mega now has its very own prototyping shield! The MegaShield mates with the Arduino Mega board and gives the user a prototyping area, two general LEDs, and, most important of all, the Arduino Mega reset switch is brought to the top level. The shield also works with our small breadboards if you don&#39;t want to solder to the prototyping area.<br />


	<br />


	This comes in kit form and must be soldered together by the end user. Please note - we do not ship assembly instructions! All soldering is through-hole (relatively easy) but always check your component orientation before soldering!<br />


	<br />


	<span style="font-weight: bold;">Kit Includes:</span></p>


<ul>


	<li>


		1x MegaShield PCB</li>


	<li>


		11x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin Arduino Stackable Header</a></li>


	<li>


		1x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8285" name="" target="_self">Bright 5mm Green LED</a></li>


	<li>


		1x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=528" name="" target="_self">Bright 5mm Red LED</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8377" name="" target="_self">330 Ohm resistors</a></li>


	<li>


		1x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=97" name="" target="_self">Momentary push button </a></li>


	<li>


		1x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8374" name="" target="_self">10k resistor</a></li>


</ul>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		All Arduino Mega pins are brought to the top level</li>


	<li>


		5V and GND power busses</li>


	<li>


		Power and stat (connected to D13) LEDs</li>


	<li>


		Reset Button brought to top level</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Mega_Shield-v12.pdf" name="" target="_blank">Protoshield Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Mega_Shield-v13.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.atomicsalad.com/archive/2010/02/07/tutorial_assembling_the_sparkfun_megashield.php" name="" target="_blank">Assembly Tutorial</a> by Bob Gallup</li>


	<li>


		<a href="http://arduino.berlios.de/" target="_blank">Arduino Home Page</a></li>


</ul>


moduleID: GPSShield-v15
family: gps shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino GPS Shield
date: 2011-07-08
path: core/GPSShield-v15.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>Adding GPS to your Arduino has never been easier. The multiple GPS receivers attach easily to the shield, and with the <a href="http://www.sparkfun.com/tutorial/GPSQuickStart/gps_parsing_v13.pde">example sketch</a>, you will be able to locate your exact position within a few meters. Here&#39;s where <a href="http://maps.google.com/maps?q=40.06477,+-105.20997" target="_blank">we are</a>. GPS also gives you amazingly accurate time! A <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=173">GPS quickstart guide</a> is available for this product.</p>


<p>


	With the GPS Shield you can add GPS functionality to your Arduino. A connector for the popular <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=465" name="" target="_blank">EM-406</a> GPS receiver is populated on the board, and footprints for <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8288" name="" target="_self">EM-408</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8297" name="" target="_self">EB-85A</a> connectors are also made available (connectors are not soldered on or included and can be found below in the related items). There is also a spot for the <a href="http://www.sparkfun.com/products/9758" target="_blank">SUP500</a> GPS module. The regular GPS pins (RX, TX, PPS, etc.) are also broken out to a 10-pin 0.1&quot; pitch header, and a small protoyping area is also provided.</p>


<p>


	The DLINE/UART switch switches the GPS module&#39;s input/output between Arduino&#39;s standard TX/RX pins or any digital pins on the Arduino (default setting uses pins 3 and 2 connected to TX and RX, respectively). The regular GPS pins (RX, TX, PPS, etc.) are broken out to a 10-pin 0.1&quot; pitch header, and a small protoyping area is also provided. An ON/OFF switch is included which controls power to the GPS module. Additionally, the Arduino reset switch is also brought out.</p>


<p>


	<span style="font-weight: bold;">Note: </span>The DLINE/UART switch must be set to DLINE in order to upload code through the Arduino IDE.</p>


<p>


	The shield also includes the footprint for a <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=7948" name="" target="_blank">12mm coin cell battery holder</a> to provide battery backup to the optional EB-85A gps module.</p>


<p>


	<span style="font-weight: bold;">Note: </span>GPS modules are not included with the GPS Shield, and only the EM-406 connector is populated. Headers are also not installed or included, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		EM-406 connector populated</li>


	<li>


		EM-408 and EB-85A connector footprints provided and connected for optional use</li>


	<li>


		SUP500 connector and footprint</li>


	<li>


		Coin cell battery socket footprint provided and connected for optional battery backup of EB-85A GPS module</li>


	<li>


		Standard Arduino sized shield</li>


	<li>


		Prototyping area</li>


	<li>


		GPS serial and PPS signals broken out to a 0.1&quot; header for additional device connections</li>


	<li>


		Arduino reset button</li>


	<li>


		DLINE/UART switch controls serial communications</li>


	<li>


		ON/OFF switch controls power to GPS module</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=173">GPS Quickstart Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=184">Assembly Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorial/GPSQuickStart/gps_parsing_v13.pde">Example Sketch</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/GPSShield-v14.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/GPSShield-v14.zip" target="_blank">Eagle Files</a></li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9487" target="_blank">GPS-09487</a></p>


moduleID: LilyPad-Light Sensor-v13
family: light sensor breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Light Sensor
date: 2011-07-08
path: core/LilyPad-Light Sensor-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V. Covering the sensor with your hand, the sensor will output 0V. In a normal indoor lighting situation, the sensor will output from 1 to 2V.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		20mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="/datasheets/DevTools/LilyPad/LilyPad-LightSensor.pdf" target="_blank">Schematic</a></li>


	<li>


		LilyPad Light Sensor Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-LightSensor-08464.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


moduleID: 1e03b5a6-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 4 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.4pins
path: obsolete/mystery_part4.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 4 pins on a 100 mil inline pin header footprint.


moduleID: 5cc9de9cdfa593d8e073514cde1c7c77
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2px24
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2px24.fzp
description:
The BASIC Stamp 2px24 serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: 6afb899bc94444e19eac0acf1c625a12
family: microcontroller board (arduino)
version: 4
fritzingversion: 0.4.2b.07.24.4368
author: Lionel Michel
title: Arduino LilyPad
label: Arduino LiliyPad
date: 2010-07-27
path: core/Arduino LilyPad.fzp
description:
The LilyPad Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.


moduleID: 1e03b59e-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 9 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.9pins
path: obsolete/mystery_part9.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 9 pins on a 100 mil inline pin header footprint.


moduleID: 2d3cbb853835749c51cc0d6e4bfd2c90
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2e
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2e.fzp
description:
The BASIC Stamp 2e serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: ADXL345-BreakoutBoard-v13
family: accelerometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Triple Axis Accelerometer Breakout - ADXL345
date: 2011-07-08
path: core/ADXL345-BreakoutBoard-v13.fzp
description:
<p>


	<b>Description:</b> This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to &plusmn;16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.&nbsp;</p>


<p>


	The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0&deg;.</p>


<p>


	Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		2.0-3.6VDC Supply Voltage</li>


	<li>


		Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V</li>


	<li>


		Tap/Double Tap Detection</li>


	<li>


		Free-Fall Detection</li>


	<li>


		SPI and I2C interfaces</li>


</ul>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-BreakoutBoard-v13.pdf" target="_blank"> Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-BreakoutBoard-v13.zip">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345.pdf" name="" target="_blank"> Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/240" target="_blank">Quickstart Guide</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345-talktest.zip" name="" target="_blank">Example Code</a> (ATmega328)</li>


	<li>


		<a href="http://bildr.org/2011/03/adxl345-arduino/" target="_blank">Bildr Tutorial </a></li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/products/9156" target="_blank">SEN-09156</a></p>


moduleID: WiFly_Shield-v17
family: wireless shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino WiFly Shield
date: 2011-07-08
path: core/WiFly_Shield-v17.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This new version breaks out the PI09, FORCE WAKE, and the hardware reset lines. It also has a different crystal and uses the RN-131C.</p>


<p>


	The WiFly Shield equips your Arduino the ability to connect to 802.11b/g wireless networks. The featured components of the shield are a Roving Network&#39;s RN-131C wireless module and an SC16IS750 SPI-to-UART chip. The SPI-to-UART bridge is used to allow for faster transmission speed and to free up the Arduino&#39;s UART.<br />


	<br />


	Power is taken from the Vin pin of your Arduino, regulated to 3.3V, and provided to both the RN-131C and the SC16IS750. You&#39;ll communicate with the WiFly Shield over SPI using Arduino digital pins 10-13 (CS, MOSI, MISO, SCLK respectively).<br />


	<br />


	The shield includes the RN-131C, SC16IS750 and their supporting components. The shield also provides a small prototyping area, with 0.1&quot; spaced holes. Headers are not soldered on, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/WiFly_Shield-v17.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/WiFly_Shield-v17.zip">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/WiFi/rn-131-ds.pdf" target="_blank">Datasheet (RN-131C)</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/WiFi/WiFlyGSX-um2.pdf" target="_blank">Reference Guide (RN-131C)</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/SC16IS740_750_760.pdf" target="_blank">SC16IS750 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=158" name="" target="_blank">Talking Wireless Server Tutorial</a></li>


	<li>


		<a href="http://forum.sparkfun.com/viewtopic.php?p=115626#p115626">Experimental WiFly Arduino Library</a></li>


	<li>


		<a href="http://forum.sparkfun.com/viewtopic.php?f=32&amp;t=25129" target="_blank">WiFly Troubleshooting</a></li>


	<li>


		<a href="http://lifeboat.co.nz/the-finished-wireless-water-sensor/" target="_blank">Wireless Water Sensor Project</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9367" target="_blank">WRL-09367</a></p>


moduleID: HIH-4030_Breakout-v10
family: humidity breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Humidity Sensor - HIH-4030 Breakout
date: 2011-07-08
path: core/HIH-4030_Breakout-v10.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a breakout board for Honeywell&#39;s HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor&#39;s near linear voltage output, the data is very easy to process.<br />


	<br />


	Voltage applied to the supply pins should be within 4-5.8VDC, and optimally at 5V. The sensor will typically only consume about 200&mu;A.<br />


	<br />


	This product comes as shown in the picture, with the HIH-4030 soldered onto the breakout board. The pins of the 3-pin header are spaced by 0.1&quot;.<br />


	<br />


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Near linear, analog output</li>


	<li>


		4-5.8VDC voltage supply</li>


	<li>


		All pins broken out to a 0.1&quot; pitch header</li>


	<li>


		Laser trimmed interchangeability</li>


	<li>


		Low power design, typical current draw of only 200&mu;A</li>


	<li>


		Enhanced accuracy</li>


	<li>


		Fast response time</li>


	<li>


		Stable, low drift performance</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 0.75 x 0.30 &quot; (19.05 x 7.62 mm)<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Weather/HIH-4030_Breakout-v10.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Weather/SEN-09569-HIH-4030-datasheet.pdf" name="" target="_blank">HIH-4030 Humidity Sensor Datasheet</a></li>


</ul>


moduleID: OBD-II-UART-v13
family: obd ii
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: OBD II UART
date: 2011-07-08
path: core/OBD-II-UART-v13.fzp
description:
<p>


	<strong>Description:</strong> This board allows you to interface with your car&#39;s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a footprint which mates directly to our FTDI Basic or a Bluetooth Mate. The DB9 connector mates with our DB9 to OBD-II cable listed below.</p>


<p>


	On-Board Diagnostics, Second Generation (OBD-II) is a set of standards for implementing a computer based system to control emissions from vehicles. It was first introduced in the United States in 1994, and became a requirement on all 1996 and newer US vehicles. Other countries, including Canada, parts of the European Union, Japan, Australia, and Brazil adopted similar legislation. A large portion of the modern vehicle fleet supports OBD-II or one of its regional flavors.</p>


<p>


	Among other things, OBD-II requires that each compliant vehicle be equipped with a standard diagnostic connector (DLC) and describes a standard way of communicating with the vehicle&rsquo;s computer, also known as the ECU (Electronic Control Unit). A wealth of information can be obtained by tapping into the OBD bus, including the status of the malfunction indicator light (MIL), diagnostic trouble codes (DTCs), inspection and maintenance (I/M) information, freeze frames, VIN, hundreds of real-time parameters, and more.</p>


<p>


	STN1110 is an OBD to UART interpreter that can be used to convert messages between any of the OBD-II protocols currently in use, and UART. It is fully compatible with the de facto industry standard ELM327 command set. Based on a 16-bit processor core, the STN1110 offers more features and better performance than any other ELM327 compatible IC.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Fully compatible with the ELM327 AT command set</li>


	<li>


		Extended ST command set</li>


	<li>


		UART interface (baud rates from 38 bps to 10 Mbps)</li>


	<li>


		Secure bootloader for easy firmware updates</li>


	<li>


		Support for all legislated OBD II protocols:


		<ul>


			<li>


				ISO 15765-4 (CAN)</li>


			<li>


				ISO 14230-4 (Keyword Protocol 2000)</li>


			<li>


				ISO 9141-2 (Asian, European, Chrysler vehicles)</li>


			<li>


				SAE J1850 VPW (GM vehicles)</li>


			<li>


				SAE J1850 PWM (Ford vehicles)</li>


		</ul>


	</li>


	<li>


		Support for non-legislated OBD protocols:


		<ul>


			<li>


				ISO 15765</li>


			<li>


				ISO 11898 (raw CAN)</li>


		</ul>


	</li>


	<li>


		Support for SAE J1939 OBD protocol</li>


	<li>


		Superior automatic protocol detection algorithm</li>


	<li>


		Large memory buffer</li>


	<li>


		Voltage input for battery monitoring</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/OBD-II-UART-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/OBD-II-UART-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/stn1110-ds.pdf" target="_blank">Datasheet</a> (STN1110)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2551.pdf" target="_blank">Datasheet </a>(MCP2551)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Widgets/ELM327_AT_Commands.pdf" target="_blank">ELM327 Command Set</a></li>


	<li>


		<a href="http://scantool.imechatronics.com/downloads.htm" target="_blank">Compatible Software List</a></li>


</ul>


moduleID: LilyPad-XBee-v15
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad XBee
date: 2011-07-08
path: core/LilyPad-XBee-v15.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on the LilyPad system.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	LilyPad XBee was co-developed by Kate Hartman and Rob Faludi. It works with all the popular XBee module types but does not ship with a module. Please see the related items below.<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		50mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-XBee-v13.pdf" name="" target="_blank"> Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-XBee-v13-Eagle.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://lilypadxbee.katehartman.com/" name="" target="_blank">Additional Information</a></li>


	<li>


		LilyPad XBee Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-XBee-08937.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


moduleID: IOIO-v15
family: android
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: IOIO for Android
date: 2011-11-29
path: core/IOIO-v15.fzp
description:
<p>


	<strong>Description: </strong>The IOIO (pronounced &quot;yo-yo&quot;) is a board specially designed to work with your Android device (OS versions 1.5 and greater). The board provides robust connectivity to an Android device via a USB connection and is fully controllable from within an Android application using a simple and intuitive Java API -<a href="http://codaset.com/ytai/ioio/wiki/The-IOIO-Manager-Application" target="_blank"><strong><em> </em></strong>no embedded programming or external programmer will ever be needed</a>!</p>


<p>


	So far, the devices proven to work are: G1, Nexus One, Nexus S, Motorola Droid X. If you get the IOIO working on your Android device, please let us know in the comments below, thanks!</p>


<p>


	The IOIO board contains a single MCU that acts as a USB host and interprets commands from an Android app. In addition, the IOIO can interact with peripheral devices in the same way as most MCUs. Digital Input/Output, PWM, Analog Input, I2C, SPI, and UART control can all be used with the IOIO. Code to control these interfaces is written in the same way as you write an Android app with the help of a simple to use app-level library. In other words, you can combine the awesome computing power, Internet/Bluetooth connectivity, touch screen, and a variety of sensors from your Android device with the ability to easily add peripheral devices to interact with the outside world. Also, using the IOIO does not require any hardware or software modifications to your Android device, thus preserving the warranty as well as making the functionality available to non-hackers.</p>


<p>


	If you are new to the IOIO or developing apps with Android, please use these resources to help get started:</p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/tutorials/280" target="_blank">Beginner&#39;s Guide</a></li>


	<li>


		<a href="http:// http://codaset.com/ytai/ioio/wiki/Downloads" target="_blank">Example Projects</a> (see the &#39;Application&#39; directory in the latest download)</li>


</ul>


<p>


	For firmware upgrades, you can download the <a href="https://market.android.com/details?id=ioio.manager" target="_blank">IOIO Manager app</a> (see the QR code in the images to the right). Also featured is a Programmer function, which lets you upgrade the bootloader of your IOIO using another IOIO as a programmer! See the <a href="http://codaset.com/ytai/ioio/wiki/The-IOIO-Manager-Application" target="_blank">IOIO Manager wiki</a> for more information.</p>


<p>


	<strong>Update</strong>: The IOIO now has beta firmware available which supports Google&#39;s Open Accessory (ADK) protocol. The code base can be found <a href="http://codaset.com/ytai/ioio/wiki/IOIO-Over-OpenAccessory-Beta" target="_blank">here</a>.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Android/IOIO-v15.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Android/IOIO-v15.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://codaset.com/ytai/ioio/wiki/Downloads" target="_blank">Firmware Downloads</a></li>


	<li>


		<a href="http://codaset.com/ytai/ioio/source" target="_blank">IOIO Code Base</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/280" target="_blank">Beginner&#39;s Guide</a></li>


	<li>


		<a href="http://codaset.com/ytai/ioio/wiki" target="_blank">IOIO Wiki Home</a></li>


	<li>


		<a href="http://codaset.com/ytai/ioio/wiki/The-IOIO-Manager-Application" target="_blank">IOIO Manager Wiki</a></li>


	<li>


		<a href="https://market.android.com/details?id=ioio.manager" target="_blank">IOIO Manager Application</a></li>


	<li>


		<a href="https://groups.google.com/forum/?pli=1#%21forum/ioio-users" target="_blank">IOIO Discussion/Support Group</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/10585" target="_blank">DEV-10585</a></p>


moduleID: d0cab10c62e1441045ed0415450e2819
fritzingversion: 0.7.0b.02.01.5801
author: red byer
title: RFM12b HopeRF Transceiver
label: RFM12b
date: 2012-03-14
path: contrib/RFM12b_HopeRF_Transceiver.fzp
description:
RF Transceiver by Hope RF.  Well supported Arduino libraries are available.  Part is available in several frequencies (433MHz, 915MHz)...


moduleID: microSD_Shield-v13
family: memory shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino MicroSD Shield
date: 2011-07-08
path: core/microSD_Shield-v13.fzp
description:
<p>


	<strong>Update:</strong> After taking a figurative lashing from the comments section we&#39;re begging for mercy by updating the microSD Shield board. All new microSD shields have a voltage converter chip on-board that converts the Arduino 5V signals to 3.3V signals in accordance with SD specifications. No more &#39;blown up&#39; SD cards!</p>


<p>


	<span style="font-weight: bold;">Description: </span>Running out of memory space in your Arduino project? The microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects. A <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=172">microSD quickstart guide</a> is available!</p>


<p>


	Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pins of the microSD socket are broken out to the ATmega168/328&#39;s standard SPI pins (digital 11-13), while the CS pin is broken out to Arduino&#39;s D8 pin. If you decide to use one of the many open source FAT libraries (like FAT16 or SDFat) make sure to change the code to reflect the location of the CS pin. Most libraries assume the CS pin is connected to D10; this will have to be changed to D8. Also for the libraries to work pin D10 will have to be set as an output in the &#39;setup()&#39; section of your sketch. The shield also includes a large prototyping area with a 13x12 grid of 0.1&quot; pitch PTHs.</p>


<p>


	This shield comes populated with a microSD socket, red power indicator LED, and a reset button; but it does not come with headers installed. We recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=172">microSD Quickstart Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorial/microSD_Shield/SD_SimpleExample.pde" target="_blank">Example sketch</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/microSD_Shield-v13 Schematic.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/microSD_Shield-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/FAT16.zip" target="_blank">FAT16 Library</a> (Unzip this folder in the Arduino Libraries Folder. Once unzipped you can find an example by going to File-&gt;Examples-&gt;FAT-&gt;FAT_Example in Arduino. You must re-open Arduino after unzipping the folder.</li>


</ul>


moduleID: 1e03b5a7-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 5 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.5pins
path: obsolete/mystery_part5.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 5 pins on a 100 mil inline pin header footprint.


moduleID: AlphaNumericDisplay-v13
family: display
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Serial Alphanumeric Display Driver
date: 2011-07-08
path: core/AlphaNumericDisplay-v13.fzp
description:
<p>


	<strong>Description:</strong> The Serial Alphanumeric Display Driver allows you to communicate with alphanumeric displays over a simple SPI interface. Based on the A6282 IC, these boards work well with all of our alphanumeric displays and we have even provided a library listed below.</p>


<p>


	You can daisy-chain as many displays as you would like to create scrolling messages. Each board has both input and output headers that connect to each other. All you need to do is define the number of displays and your message. Check the example code below.</p>


<p>


	<strong>Note:</strong> This product includes only the carrier board. You will need to provide your own alphanumeric display. Check the related products below for ones that will work.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumericDisplay-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumericDisplay-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/SMD/A6282.pdf" target="_blank">Datasheet</a> (A6282)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumeric_Driver.pde">Example Arduino Code</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/AlphaNumeric_Driver-v13.zip">Arduino Library</a></li>


</ul>


moduleID: 1e03b59f-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 18 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.18pins
path: obsolete/mystery_part18.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 18 pins on a 100 mil inline pin header footprint.


moduleID: 346b613c666d64fc5ac622407ace7130
family: microcontroller board (mbed)
version: 4
fritzingversion: 0.3.14b.12.13.3867
author: André Knörig
title: mbed
label: MBED
date: 2009-12-17
path: core/controller_mbed.fzp
description:
A powerful microcontroller board based on the NXP LPC processor with an ARM Cortex core. See http://mbed.org for more info.


moduleID: ArduPilotMega_v15
family: uav
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: ArduPilot Mega
date: 2011-11-29
path: core/ArduPilotMega_v15.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The ArduPilot Mega is the newest version of autopilot board designed by Chris Anderson and Jordi Mu&ntilde;oz of DIY Drones. This latest revision uses<span><span> </span></span>the ATmega2560<span><span> in place of the ATmega1280.</span></span><br />


	<br />


	<span>ArduPilot Mega is a fully programmable autopilot that requires a GPS module and sensors</span><span> to create a functioning Unmanned Aerial Vehicle (UAV). The autopilot handles both stabilization and navigation, eliminating the need for a&nbsp;separate&nbsp;stabilization system. It also supports a &quot;fly-by-wire&quot; mode that can stabilize an aircraft when flying manually under RC control, making it easier and safer to fly. The hardware and software are all open source. The board comes with all the surface-mount parts already soldered, but requires the user to solder on connectors. RC processing firmware is already loaded, but the autopilot software must be downloaded and loaded onto the board by the user.</span><span> It can be programmed with the&nbsp;<a href="http://arduino.cc/en/Main/Software" name="">Arduino IDE</a>. </span><br />


	<br />


	We recommend the following items to accompany this product:</p>


<div>


	<ul>


		<li>


			<a href="http://store.diydrones.com/product_p/spk-gps-gs407.htm">uBlox 5 GPS module</a> and <a href="http://store.diydrones.com/product_p/br-0008-01.htm">adapter</a></li>


		<li>


			<a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8772" name="" target="">FTDI Basic</a> or <a href="http://store.diydrones.com/ProductDetails.asp?ProductCode=TTL%2D232R%2D3V3" name="" target="_blank">FTDI cable</a> for programming</li>


	</ul>


</div>


<div>


	Other necessary elements, including aircraft recommendations, can be found at the project&#39;s home page.</div>


<div>


	<div style="font-weight: bold;">


		<br />


		<span><span>Features:</span></span></div>


	<div>


		<ul>


			<li>


				<span>Controller designed to be used with autonomous aircraft, car or boat.</span></li>


			<li>


				<span><span>Based on a 16MHz Atmega2560 processor.</span></span></li>


			<li>


				<span><span>Built-in hardware failsafe that uses a separate circuit (multiplexer chip and ATMega328 processor) to transfer control from the RC system to the autopilot and back again. Includes ability to reboot the main processor in mid-flight</span></span></li>


			<li>


				<span><span>Dual-processor design with 32 MIPS of onboard power</span></span></li>


			<li>


				<span><span>Supports of 3D waypoints and mission commands (limited only by memory)</span></span></li>


			<li>


				<span><span>Comes with a 6-pin GPS connector (EM406 style). </span></span></li>


			<li>


				<span><span>Has 16 spare analog inputs (with ADC on each) and 40 spare digital input/outputs to add additional sensors</span></span></li>


			<li>


				<span><span>Four dedicated serial ports for two-way telemetry (using optional<a href="../commerce/product_info.php?products_id=9097"> XBee modules</a>) and expansion<br />


				</span></span></li>


			<li>


				<span><span>Can be powered by either the RC receiver or a separate battery</span></span></li>


			<li>


				<span><span>Hardware-driven servo control, which means less processor overhead, tighter response and no jitters</span></span></li>


			<li>


				Eight <span><span>RC channels (including the autopilot on/off channel) can be processed by the autopilot.&nbsp;</span></span></li>


			<li>


				<span><span>LEDs for power, failsafe status, autopilot status and GPS lock</span></span></li>


			<li>


				<span><span>Full autopilot software, including IMU and groundstation/mission planning code,&nbsp; are available at <a href="http://diydrones.com/">DIY Drones</a>. Code supports autonomous takeoff and landing. </span></span></li>


		</ul>


	</div>


</div>


<div>


	<span style="font-weight: bold;">Dimensions:</span> 40mm x 69mm</div>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/ArduPilotMega_v15.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/ArduPilotMega_v15.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/ArduPilotMega_demo.zip" target="_blank">Example Firmware</a> - reads in 8 channels and outputs 8 channels</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/ArduPilotMega_dancing.zip" target="_blank">Example Dancing Firmware</a> - <a href="http://www.youtube.com/watch?v=U0Smrhy1xYg" target="_blank">Video</a></li>


	<li>


		<a classname="" href="http://ardupilot.com/" name="" target="_blank">ArduPilot Project Homepage</a></li>


	<li>


		Software and instructions: <a classname="" href="http://diydrones.com/" name="" target="_blank">DIY Drones Community</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/9710" target="_blank">GPS-09710</a></p>


moduleID: PowerSupply-Lipo-v14
family: power conditioning
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad LiPower
date: 2011-07-08
path: core/PowerSupply-Lipo-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected.<br />


	<br />


	This board has a JST connector, which will connect to our JST terminated single cell 3.7V LiPo batteries. It also has terminals for charging the LiPo battery with one of our LiPo chargers.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable - but be sure to remove the battery!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		18mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-PowerSupply-Lipo.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		LilyPad LiPower Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-LiPower-08786.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


moduleID: RGB_matrix_v25
family: display
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LED Matrix - Serial Interface - Red/Green/Blue
date: 2011-07-08
path: core/RGB_matrix_v25.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a large sized RGB LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it. All the refreshing and communication control is taken care of by the backpack. It&#39;s even reprogrammable! 7 software selectable colors are available!<br />


	<br />


	Unit comes with a Red/Green/Blue LED Matrix assembled with a RGB Matrix Backpack Controller.<br />


	<br />


	Check out the <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=91" name="" target="_blank">LED Coffee Table</a> tutorial!<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/rgbmatrixbackpack_userguide.pdf" name="" target="_blank">Matrix Backpack Controller Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/RGB_Backpack_v4.zip" name="" target="">RGB Serial Matrix Firmware</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/RGB_Sample_Interface_Code.zip" name="" target="">Sample Interface Code</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/RGBMatrixBackpackSketch.zip" name="" target="_blank">Sample Arduino Sketch</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/RGB_matrix_v25.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/YSM-2388CRGBC.pdf" name="" target="_blank">Triple Color LED Matrix Datasheet</a></li>


</ul>


<p>


	<span style="font-weight: bold;">Example Projects:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/LED_MATRIX_CODE.zip" target="_blank">Example Software for older RGB Serial Matrix</a></li>


	<li>


		<a classname="" href="http://wiring.org.co/learning/basics/rbgbackpack.html" name="" target="_blank">Wiring Example</a></li>


	<li>


		<a href="http://www.nokinomo.com/films/films.php?Id=13" target="_blank">Example deployment</a> by Nokinomo</li>


	<li>


		<a classname="" href="http://www.youtube.com/watch?v=hEKEM6ZOsZE" name="" target="_blank">Example Project</a> by Mr. Nick Hall</li>


	<li>


		<a classname="" href="http://www.halfmachine.dk/posts/60" name="" target="_blank">Ladies and Mens Room Mixup</a> by Vanessa Carpenter</li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/44">Ethernet LED Matrix</a> tutorial by Owen Osborn</li>


</ul>


<p>


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		2.38x2.38&quot; square</li>


	<li>


		Max width of backpack including connector pins - 1.1&quot;</li>


</ul>


moduleID: 760832bc79fe1f34e99f420ad872a0b8
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2 sx
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2.fzp
description:
The BASIC Stamp 2 serves as the brains inside of electronics projects and applications that require a programmable microcontroller.  It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: RN41-v14
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Bluetooth Module Breakout - Roving Networks (RN-41)
date: 2011-11-29
path: core/RN41-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a simple breakout for the Roving Networks Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>module. All pertinent pins are broken out and labeled. This new version&#39;s headers are unpopulated. Check below for appropriate headers.<br />


	<br />


	The module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables. The Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>stack is completely encapsulated. The end user just sees serial characters being transmitted back and forth. Press the &#39;A&#39; character from a terminal program on your computer and an &#39;A&#39; will be pushed out the TX pin of the Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>module.</p>


<p>


	<span style="font-weight: bold;">Do not</span> attach this device directly to a serial port. You will need an <a href="http://www.sparkfun.com/products/718" target="_blank">RS232 to TTL converter circuit</a> if you need to attach this device to a computer.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Fully qualified Bluetooth module</li>


	<li>


		FCC Certified</li>


	<li>


		Fully configurable UART</li>


	<li>


		UART Data rates up to 3Mbps</li>


	<li>


		Over air data rate of 721kbps to 2.0Mbps</li>


	<li>


		Low power sleep mode</li>


	<li>


		Compatible with all Bluetooth<sup><font face="Tahoma, sans-serif"><b> </b></font></sup>products that support SPP (almost all do)</li>


	<li>


		Includes support for BCSP, DUN, LAN, GAP SDP, RFCOMM, and L2CAP protocols</li>


	<li>


		3.3V operation</li>


	<li>


		Status pin</li>


	<li>


		Bluetooth Technology v2.0 compatible</li>


	<li>


		Class 1 power output</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 1.0x0.9&quot;</p>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/RN41-v14.pdf">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/RN41-v14.zip">Eagle Files</a></li>


	<li>


		<a href="http://www.rovingnetworks.com/documents/RN-41.pdf" target="_blank">RN-41 Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/rn-bluetooth-um.pdf" name="" target="_blank">RN-41 AT Command Set</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/pic-example-1-1.pdf" name="" target="_blank">PIC Example</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=65" name="" target="_blank">Tutorial</a> (interfacing a 3.3V device to a 5V micro)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/10144" target="_blank">WRL-10144</a></p>


moduleID: IR_Receiver_v14
family: ir
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: IR Receiver Breakout
date: 2011-07-08
path: core/IR_Receiver_v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation built into the unit. Simply point a IR remote at the receiver, hit a button, and you&#39;ll see a stream of 1s and 0s out of the data pin.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Infrared/tsop853.pdf" name="" target="_blank">Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Infrared/IR-Receiver-Schematic.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://en.wikipedia.org/wiki/Consumer_IR" target="_blank">Consumer IR Information</a></li>


</ul>


moduleID: c624c0ff7a2eb1ca7994123ee87f58fb
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 1
label: BS
date: 2010-04-12
path: core/BASIC_Stamp_1.fzp
description:
It's amazing what you can accomplish with this well-proven microcontroller and its simple PBASIC 1 language.  All vital components (processor, clock source, memory, power regulator) are provided on the BS1's tiny PCB; just connect power and go!  The BASIC Stamp 1 (BS1-IC) is an ideal fit for applications that don't require the speed, I/O, and memory of the BASIC Stamp 2 series of microcontrollers.


moduleID: RFID_USB_Reader-v14
family: rfid
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: RFID USB Reader
date: 2011-07-08
path: core/RFID_USB_Reader-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your choice at 9600bps 8N1, then scan your 125kHz ID tag and the unique 32-bit ID will be shown on the screen. The unit is based on a FTDI chip and comes with a read LED and buzzer.</p>


<p>


	This new revision uses SMD headers for the RFID module, and has a solder jumper which allows you to disable or enable the buzzer.<br />


	<br />


	<strong>Note: </strong>This product does not come with the RFID reader. Check below for compatible readers.<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 1.4x1.2x0.57&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/ID/RFID_USB_Reader-v14.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/ID/RFID_USB_Reader-v14Eagl.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.ftdichip.com/FTDrivers.htm" name="" target="_blank">USB FTDI Drivers for Linux, MAC, and PC</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/8852" target="_blank">SEN-08852</a></p>


<p>


	&nbsp;</p>


<p>


	&nbsp;</p>


<p>


	<object height="300" width="560"><param name="movie" value="http://www.youtube.com/v/2ioDBOOAFvM&amp;hl=en_US&amp;fs=1&amp;rel=0" /><param name="allowFullScreen" value="true" /><param name="allowscriptaccess" value="always" /><embed allowfullscreen="true" allowscriptaccess="always" height="300" src="http://www.youtube.com/v/2ioDBOOAFvM&amp;hl=en_US&amp;fs=1&amp;rel=0" type="application/x-shockwave-flash" width="560"></embed></object></p>


moduleID: ISD1932 Breakout-v11
family: audio recorder
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: ISD1932 Voice Recorder w/ Mic
date: 2011-07-08
path: core/ISD1932 Breakout-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a breakout board for the ISD1932, a<span id="RadEditorPlaceHolderControl1"> multiple-message record/playback device.</span> This single chip can record up to 64 seconds worth of voice messages. Microphone inputs and speaker outputs are all handled by the ISD1932.<br />


	<br />


	A switch is connected to allow selection of the ISD1932&#39;s operating mode - <span id="RadEditorPlaceHolderControl1">address trigger or direct trigger.</span> You must cycle the power after switching the mode. An LED is also populated on the board and will illuminate when the device is recording.<br />


	<br />


	An external resistor is necessary to select the record duration and sampling frequency, which can range from 21.2 - 64 seconds (4-12kHz sampling frequency).<br />


	<br />


	The board breaks out all pins of the ISD1932 to 0.1&quot; spaced headers. This product comes as shown in the pictures with filtering capacitors, an LED, mode selecting switch and the ISD1932 IC.<br />


	<br />


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Operating mode selector switch</li>


	<li>


		2.4V to 5VDC supply voltage</li>


	<li>


		LED indicates if the board is recording</li>


	<li>


		Record up to 64 seconds of audio</li>


	<li>


		All pins of the ISD1932 broken out to 0.1&quot; headers</li>


	<li>


		Breadboard friendly</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions: </span>1.0 x 1.3 &quot; (25.4 x 33.02 mm)<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/BOB-09579-ISD1932%20Breakout-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/BOB-09579-ISD1900.pdf" name="" target="_blank">ISD1932 Datasheet</a></li>


</ul>


moduleID: EasyDriver_v44
family: motor driver
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: EasyDriver_v44
date: 2011-07-10
path: core/EasyDriver_v44.fzp
description:
<p>

	<strong>Replacement:</strong> <a href="http://www.sparkfun.com/products/10267" target="_blank">ROB-10267</a>. The new version fixes the silkscreen error. This page is for reference only.</p>

<p>

	<span style="font-weight: bold;">Description:</span> The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse. EasyDriver requires a 7V to 30V supply to power the motor, and has an on board voltage regulator for the digital interface. Connect a 4-wire stepper motor and a microcontroller and you&#39;ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.</p>

<p>

	This is the newest version of EasyDriver V4 co-designed with <a classname="" href="http://www.schmalzhaus.com/" name="" target="_blank">Brian Schmalz</a>. It provides much more flexibility and control over your stepper motor, when compared to older versions.&nbsp;The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.<br />

	<br />

	<span style="font-weight: bold;">Caution:</span> Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.</p>

<p>

	<strong>Note:</strong> Version 4.3 of the PCB has an error on the Current Adjustment silkscreen. The Min/Max labels are reversed. The correct direction for maximum current is counter-clockwise.<br />

	<br />

	<span style="font-weight: bold;">Features:</span></p>

<ul>

	<li>

		A3967 microstepping driver</li>

	<li>

		MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eigth steps</li>

	<li>

		Compatible with 4, 6, and 8 wire stepper motors</li>

	<li>

		Adjustable current control from 150mA/phase to 750mA/phase</li>

	<li>

		Power supply range from 7V to 30V. The higher the voltage, the higher the torque.</li>

</ul>

<p>

	<span style="font-weight: bold;">Documents:</span></p>

<ul>

	<li>

		<a classname="" href="http://www.sparkfun.com/datasheets/Robotics/EasyDriver_v43.pdf" name="" target="_blank">Schematic</a></li>

	<li>

		<a href="http://www.sparkfun.com/datasheets/Robotics/A3967.pdf" target="_blank">A3967 Datasheet</a></li>

	<li>

		<a classname="" href="http://schmalzhaus.com/EasyDriver/" name="" target="_blank">EasyDriver Website</a></li>

	<li>

		Example <a classname="" href="http://www.tigoe.net/pcomp/code/circuits/motors/controlling-dc-motors" target="_blank">Stepper Motor Control</a></li>

	<li>

		Example <a classname="" href="http://lusorobotica.com/index.php/topic,106.0.html" name="" target="_blank">Arduino Tutorial</a> in Portuguese</li>

</ul>

<p>

	&nbsp;</p>

<ul>

</ul>


moduleID: Amplified-Mic-Electret-v14
family: microphone breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Breakout Board for Electret Microphone
date: 2011-07-08
path: core/Amplified-Mic-Electret-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc loud enough to be picked up by a microcontroller&#39;s Analog to Digital converter. Unit comes fully assembled as shown. Works from 2.7V up to 5.5V.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Amplified-Mic-Electret-v14.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="/datasheets/BreakoutBoards/Mic-Testing-v10.zip" target="_blank">Example PIC ADC Code</a></li>


	<li>


		<a href="http://focus.ti.com/lit/ds/symlink/opa344.pdf" target="_blank">OPA344 Datasheet</a></li>


	<li>


		<a href="http://negativeacknowledge.com/2008/06/11/final-lightbar-controller/" target="_blank">Example Audio LED control project</a> by Adam Greig</li>


</ul>


moduleID: ProtoShield-v25
family: prototype shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino ProtoShield
date: 2011-07-08
path: core/ProtoShield-v25.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the folks at <a href="http://www.sparkfun.com" target="_blank">SFE</a> and <a href="http://itp.nyu.edu/itp/" target="_blank">ITP @ NYU</a>, the ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all - the Arduino reset switch is brought to the top level. A <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=191">ProtoShield quickstart guide</a> is available!<br />


	<br />


	This comes in kit form and must be soldered together by the end user. Please note - we do not ship assembly instructions, but you can find a big, clean photographed assembly guide <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=181">here</a>! There are a few tutorials on assembly listed below. All soldering is through-hole (relatively easy) but always check your component orientation before soldering!<br />


	<br />


	The kit is pictured with the bread-board option. We highly recommend this breadboard! See the related items below for all the colorful options of breadboards you have.<br />


	<br />


	<span style="font-weight: bold;">Kit Includes:</span></p>


<ul>


	<li>


		1x ProtoShield bare PCB</li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">Stackable Headers 6-pin</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">Stackable Headers 8-pin</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=532" name="" target="_self">5mm Basic Yellow LEDs</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8377" name="" target="_self">330 Ohm resistors </a></li>


	<li>


		1x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8374" name="" target="_self">10k resistor</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=97" name="" target="_self">Momentary push buttons</a></li>


	<li>


		2x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8375" name="" target="_self">0.1uF Ceramic Capacitors </a></li>


</ul>


<p>


	<span style="font-weight: bold;">Features:<br />


	</span></p>


<ul>


	<li>


		All Arduino pins are brought to the top level</li>


	<li>


		5V, GND, and Vin pins are exposed as well</li>


	<li>


		BlueSMiRF socket for wireless communication between Arduinos</li>


	<li>


		2 general use LEDs</li>


	<li>


		1 general use button</li>


	<li>


		Reset button brought to top level</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=191">ProtoShield Quickstart Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=181">Assembly Instructions</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/ProtoShield-v25.pdf" name="" target="_blank">ProtoShield Schematic</a></li>


	<li>


		<a href="http://arduino.cc" target="_blank">Arduino Home Page</a></li>


	<li>


		<a classname="" href="http://www.atomicsalad.com/archive/2010/02/02/tutorial_sparkfun_protoshield_for_arduino_assembly_updated.php" name="" target="_blank">Assembly Tutorial</a> by Bob Gallup</li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/ProtoShield-v25.zip" name="" target="">ProtoShield Eagle Files</a></li>


</ul>


<p>


	<strong>Standalone Circuit Board:</strong><span style="font-weight: bold;"> </span><a href="http://batchpcb.com/index.php/Products/31479" target="_blank">BatchPCB: Arduino ProtoShield</a></p>


moduleID: 74HC595 Shift Reg Breakout-v11
family: shift register
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Shift Register Breakout - 74HC595
date: 2011-11-29
path: core/74HC595 Shift Reg Breakout-v11.fzp
description:
<p>


	<strong>Description:</strong> This is a breakout for the SOIC version of the 74HC595 shift register IC. Clock in data and latch it to free up IO pins on your micro. All pins from the IC are broken out to standard 0.1&quot; spaced headers. The Serial in and out pins are on opposite sides of the board with the remaining pins carried over so that multiple shift register boards can be chained together.</p>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/74HC595 Shift Reg Breakout-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/74HC595 Shift Reg Breakout-v11.zip">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/MM74HC595.pdf" target="_blank">Datasheet</a> (MM74HC595M)</li>


	<li>


		<a href="http://bildr.org/2011/02/74hc595/" target="_blank">bildr blog - 74HC595 Project</a></li>


</ul>


moduleID: LeDeuligne1.1
family: lcd shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Snootlab
title: DeuLigne 1.1 - The Snootlab's LCD shield for Arduino
date: 2011-11-28
path: core/LeDeuligne1.1.fzp
description:
	<div id="idTab1" class="rte"><p>The LCD shield for Arduino by Snootlab</p>



<p>&nbsp;</p>



<p>LCD 2x16 characters alphanumeric for Arduino</p>



<p>Principal features :</p>



<ul>



<li>2 lines of 16 characters dispaly</li>



<li>1 joystick 5 positions (up, down, left, right, action) using only one analog input pin (A0 defaut, can be changed if necessary)</li>



<li>I2C managed display; all the digital input/output of the Arduino are available</li>



<li>One library available</li>



<li>Software configured backlight (can be unactivated)</li>



<li>Contrast control on the shield</li>



<li>Strong mechanical mounting of the display maintained by spacers and screws</li>



<li>Reset buton on top of the shield</li>



</ul>



<p>&nbsp;</p>



<p>This <strong>new 1.1 release</strong>&nbsp;has now three holes compatible with Arduino making mechanical connection between the Arduino-Shield-LCD very strong and make it embeddable on robots.</p>



<p>&nbsp;</p>



<p>Assembly guide : <a href="http://shop.snootlab.com/attachment.php?id_attachment=59" target="_blank">link</a></p>



<p>&nbsp;</p>



<p>Library on GitHub : <a href="https://github.com/Snootlab/Deuligne" target="_blank">link</a></p>



<p>Our libraries are available for Arduino and Arduino 1.0 (select the branch on Github).</p>



<p>&nbsp;</p>



<p>The official support forum:&nbsp;<a href="http://forum.snootlab.com" target="_blank">forum.snootlab.com</a></p>



moduleID: LilyPad Coincell-Battery-v17
family: power connector
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Coin Cell Battery Holder
date: 2011-07-08
path: core/LilyPad Coincell-Battery-v17.fzp
description:
<p>

	<strong>Description:</strong> If you&#39;re looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick. It&#39;s a simple board which holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points (two positive and two negative) for sewing into your project.</p>

<p>

	<strong>Note:</strong> The LilyPad Coin Cell Battery Holder is a design conceived by Felicia Williams of Boulder, Colorado. Also, a portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.&nbsp;</p>



moduleID: ACS712 Low Current Sensor Board v12
family: current sensor
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: jonathan
title: ACS712 Low Current Sensor Board v12
date: 2011-07-21
path: core/ACS712 Low Current Sensor Board v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems. The ACS712 current sensor measures up to 5A of DC or AC current. We added an opamp gain stage for more sensitive current measurements. By adjusting the gain (from 4.27 to 47) you can measure very small currents.<br />


	<br />


	The ACS712 Low Current Sensor Breakout outputs an analog voltage that varies linearly with sensed current. To calibrate, first set the output offset to the desired level (with zero current on the sense lines, read output with a DVM). Then with a known current input (a 100mA limited supply works well for this), set the output deflection with the gain pot. Sensitivity is then calculated as (Vref - Vdeflect)/(current input).<br />


	<br />


	The bandwidth on the ASC712 Low Current Sensor Breakout has been set to 34Hz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by removing C1. See schematic for more details.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/0712.pdf" name="" target="_blank">ACS712 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/ACS712%20Low%20Current%20Sensor%20Board%20v12.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a href="http://wiring.org.co/learning/basics/currentacs712.html" target="_blank">Wiring Example</a></li>


</ul>


moduleID: MIDI Music Shield-v13
family: music shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Musical Instrument Shield
date: 2011-07-08
path: core/MIDI Music Shield-v13.fzp
description:
<p>


	<strong>Description:</strong> Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project. This board is built around the VS1053 MP3 and MIDI codec IC, wired in MIDI mode. Simply connect a speaker/stereo/pair of headphones to the 1/8&quot; stereo jack on the shied and pass the proper serial commands to the IC and you&#39;ll be playing music in no time!</p>


<p>


	The VS1053 contains two large tonebanks including various piano, woodwinds, brass, synth, SFX and percussion sounds. The shield is also capable of playing several tones simultaneously (maximum polyphony of up to 31 sounds!). Take a look at our example code to get an idea of how easy it is to add musical zest to your next Arduino gadget.</p>


<p>


	In this version, we&#39;re using a better regulator, corrected the speaker connectors, and have the reset pin pulled high. We&#39;ve also included solder jumpers for pin 3 and 4 so they&#39;re selectable.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MIDI Music Shield-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MIDI Music Shield-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MusicIntrument_Example.pde" target="_blank">Example Code 1</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MusicIntrument_Example2.pde" target="_blank">Example Code 2<br />


		</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/SMD/vs1053.pdf" target="_blank">Datasheet</a> (VS1053)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/10529" target="_blank">DEV-10529</a></p>


moduleID: XBee-Regulated-v12
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: XBee Explorer Regulated
date: 2011-07-08
path: core/XBee-Regulated-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with Arduino Pro boards for <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=122" name="" target="_blank">wireless bootloading</a> and USB based configuration.<br />


	<br />


	This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions. Plug an XBee into this breakout and you will have direct access to the serial and programming pins on the XBee unit and will be able to power the XBee with 5V.<br />


	<br />


	This board comes fully populated with 3.3V regulator (16V max input), XBee socket, four status LEDs, and a diode to allow 5V systems to communicate safely with the 3.3V XBees. This board does not include and XBee module. XBee modules sold below.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Zigbee/XBee-Regulated-v10.pdf" name="" target="_blank">Schematic<br />


		</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Zigbee/XBee-Regulated-v12.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.digi.com/support/kbase/kbaseresultdetl.jsp?kb=125" target="_blank">X-CTU Software</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/257" target="_blank">XBee Introduction and Buying Guide</a></li>


</ul>


moduleID: 2d505f861194750183f944ba86c13b44_28
family: infrared
version: 4
fritzingversion: 0.2.2.b.03.04.2550
author: Stefan Hermann
title: TSOP312.., 314..
label: IR
path: core/tsop312.fzp
description:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd">
<html><head><meta name="qrichtext" content="1" /><style type="text/css">
p, li { white-space: pre-wrap; }
</style></head><body style=" font-family:'Lucida Grande'; font-size:13pt; font-weight:400; font-style:normal;">
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The TSOP312.., TSOP314.. series are miniaturized receivers for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame, the epoxy package acts as an IR filter.</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">The demodulated output signal can be directly decoded by a microprocessor. The TSOP312.. is compatible with all common IR remote control data formats. The TSOP314.. is optimized to suppress almost all spurious pulses from</p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">energy saving fluorescent lamps but will also suppress some data signals. </p></body></html>


moduleID: Joystick_Shield-v14
family: joystick shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Joystick Shield
date: 2011-07-08
path: core/Joystick_Shield-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The Joystick Shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=8978" name="" target="_self">Nintendo controllers</a>.</p>


<p>


	<strong>Please note:</strong> This is an older version of the PCB that does not have the prototyping area. The examples and assembly guides still apply. We&#39;re just trying to give these PCBs a happy home before we move on to the next revision.<br />


	<br />


	The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.<br />


	<br />


	This product is only the Joystick Shield PCB - you&#39;ll need to purchase the buttons and joystick separately, and assemble the controller yourself. Here&#39;s what you&#39;ll need in addition to the shield:</p>


<ul>


	<li>


		4 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9190" name="" target="_self">Momentary Push Button Switch - 12mm Square</a></li>


	<li>


		1 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9032" name="" target="_blank">Thumb Joystick</a></li>


	<li>


		1 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=97" name="" target="_blank">Mini Push Button Switch</a> (breaks out Arduino&#39;s reset switch)</li>


	<li>


		2 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6-pin Arduino Stackable Header</a></li>


	<li>


		2 x <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin Arduino Stackable Header</a></li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=161" target="_blank">Joystick Assembly Tutorial</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=171" target="_blank">Joystick Quickstart Guide</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Joystick_Shield-v12.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Joystick_Shield-v13.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/Joystick_Shield_Example.zip" name="" target="_blank">Arduino Sample Sketch</a></li>


</ul>


moduleID: Gas_Sensor_Breakout-v12
family: gas breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Gas Sensor Breakout Board
date: 2011-07-08
path: core/Gas_Sensor_Breakout-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Simple breakout board for the MQ - 3, MQ - 4, MQ - 6 and MQ - 7 gas sensors.&nbsp; All you need is VCC at 5V, GND, and a resistor to an ADC, that is it.<br />


	<br />


	<span style="font-weight: bold;">Note: </span>This is the PCB only. Sensors listed below.<br style="font-weight: bold;" />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 16.8mm diameter<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/Gas_Sensor_Breakout-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a href="http://wiring.org.co/learning/basics/airqualitymq135.html" target="_blank">Wiring Example</a></li>


</ul>


<p>


	<br />


	&nbsp;</p>


moduleID: 3a761a45-f1ff-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 3 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.3pins
path: obsolete/mystery_part3.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 3 pins on a 100 mil inline pin header footprint.


moduleID: Color-LCD-Shield-v14
family: display shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Color LCD Shield
date: 2011-07-08
path: core/Color-LCD-Shield-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The Color LCD Shield, recommended by and designed in partnership with an SFE customer, provides an easy method of connecting the popular <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=569" name="" target="_self">Nokia 6100 LCD</a> to your <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=666" name="" target="_self">Arduino USB</a> or <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_self">Pro</a>. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to pins D3-5).<br />


	<br />


	The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the &#39;5V&#39; pin of the Arduino is boosted to 7V to power the LCD backlight.<br />


	<br />


	The Nokia 6100 LCD is included with the Color LCD Shield. Headers are not soldered on, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Color-LCD-Shield-v12.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Color-LCD-Shield-Example.zip" name="" target="_blank">Example Code</a></li>


	<li>


		<a href="http://peterdavenport.blogspot.com/p/lcd-library.html" target="_blank">Example Arduino Library</a> (Thanks Peter!)</li>


	<li>


		<a href="http://www.cbxdragbike.com/arduino/sparkfunlcd/index.html" target="_blank">Example Arduino Code</a> (Thanks Mark!)</li>


</ul>


moduleID: ADXL335_v13
family: accelerometers
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Triple Axis Accelerometer Breakout - ADXL335
date: 2011-12-05
path: core/ADXL335_v13.fzp
description:
Accelerometer for sensing three-dimensional orientation/acceleration on a breakout board. Compatible to the ADXL3xx series of sensor chips.


moduleID: HEF4094
family: 4000 series
fritzingversion: 0.6.3b.08.16.5401
author: Sorki
title: HEF4094
label: HEF4094
date: 2011-08-30
path: core/HEF4094.fzp
description:
(Identical part HCF4094)

The HEF4094 is an 8-stage serial shift register. It has a storage latch associated with each stage for strobing data from the serial input to parallel buffered 3-state outputs. 

The parallel outputs may be connected directly to common bus lines. 

Data is shifted on positive-going clock transitions. The data in each shift register stage is transferred to the storage register when the strobe input is HIGH. Data in the storage register appears at the outputs whenever the output enable signal is HIGH.

Two serial outputs are available for cascading a number of HEF4094 devices. 

Serial data is available at QS on positive-going clock edges to allow high-speed operation in cascaded systems with a fast clock rise time. The same serial data is available at Q'S on the next negative going clock edge. This is used for cascading HEF4094 devices when the clock has a slow rise time.

It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input. 


moduleID: arduinoXbeere
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Arduino
title: Arduino Xbee Libellium Shield
date: 2012-03-10
path: core/arduinoXbeere.fzp
description:
The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad. It also provides female pin headers for use of digital pins 2 to 7 and the analog inputs, which are covered by the shield (digital pins 8 to 13 are not obstructed by the shield, so you can use the headers on the board itself).

The Xbee shield was created in collaboration with Libelium, who developed it for use in their SquidBee motes (used for creating sensor networks).


moduleID: ArduinoBluetoothMatev13
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Bluetooth Mate Silver
date: 2011-07-08
path: core/ArduinoBluetoothMatev13.fzp
description:
<p>


	<b>Description: </b>The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with our <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_self">Arduino Pros</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9266" name="" target="_self">LilyPad Arduinos</a>. These modems work as a serial (RX/TX) pipe, and are a great wireless replacement for serial cables. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.</p>


<p>


	Bluetooth Mate has the same pin out as the FTDI Basic, and is meant to plug directly into an Arduino Pro, Pro Mini, or LilyPad Mainboard. Because we&#39;ve arranged the pins to do this, you cannot directly plug the Bluetooth Mate to an FTDI Basic board (you&#39;ll have to swap TX and RX).</p>


<p>


	The RN-42 is perfect for short range, battery powered applications.&nbsp; The RN-42 uses only 26uA in sleep mode while still being discoverable and connectable.&nbsp; Multiple user configurable power modes allow the user to dial in the lowest power profile for a given application. If you need longer range, check out the Bluetooth Mate Gold.</p>


<p>


	The Bluetooth Mate has on-board voltage regulators, so it can be powered from any 3.3 to 6VDC power supply. We&#39;ve got level shifting all set up so the RX and TX pins on the remote unit are 3-6VDC tolerant. <span style="font-weight: bold;">Do not</span> attach this device directly to a serial port. You will need an <a href="http://www.sparkfun.com/products/449" target="_blank">RS232 to TTL converter circuit</a> if you need to attach this to a computer.</p>


<p>


	Unit comes without a connector; if you want to connect it to an Arduino Pro, we&#39;d suggest the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9429" name="" target="_self">6-pin right-angle female header</a>.</p>


<p>


	<strong>Note: </strong>The hardware reset pin of the RN-42 module is broken out on the bottom side of the board. This pin is mislabeled as &#39;PIO6&#39;, it is actually PIO4. Should you need to reset the Mate, pull this pin high upon power-up, and then toggle it 3 times.</p>


<p>


	<span style="font-weight: bold;">Features</span><b>:</b></p>


<ul>


	<li>


		Designed to work directly with Arduino Pro&#39;s and LilyPad main boards</li>


	<li>


		FCC Approved Class 2 Bluetooth<sup><font face="Tahoma, sans-serif"><b>&reg; </b></font></sup>Radio Modem!</li>


	<li>


		Low power consumption : 25mA avg</li>


	<li>


		Hardy frequency hopping scheme - operates in harsh RF environments like WiFi, 802.11g, and Zigbee</li>


	<li>


		Encrypted connection</li>


	<li>


		Frequency: 2.4~2.524 GHz</li>


	<li>


		Operating Voltage: 3.3V-6V</li>


	<li>


		Serial communications: 2400-115200bps</li>


	<li>


		Operating Temperature: -40 ~ +70C</li>


	<li>


		Built-in antenna</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions: </span></p>


<ul>


	<li>


		Board: 1.75x0.65&quot;<br />


		<span style="font-weight: bold;"> </span></li>


</ul>


<p>


	<b>Documents:</b> <a href="http://www.sparkfun.com/datasheets/RF/BlueSMiRF_v1.pdf" target="_blank"><br />


	</a></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/ArduinoBluetoothMatev13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/ArduinoBluetoothMatev13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Wireless/Bluetooth/rn-bluetooth-um.pdf" name="" target="_blank">RN-42 AT Command Set</a><a href="http://www.sparkfun.com/datasheets/RF/RN_BlueportII-ref-guide.pdf" id="Roving Networks Bluetooth Command Set" name="Roving Networks Bluetooth Command Set" target="_blank"></a></li>


	<li>


		<a classname="" href="http://www.rovingnetworks.com/documents/RN-41.pdf" name="Roving Networks Bluetooth module datasheet" target="_blank">Roving Networks Bluetooth<sup><font face="Tahoma, sans-serif"><b>&reg;</b></font></sup> module datasheet</a><br />


		<a href="http://www.sparkfun.com/datasheets/RF/RN-24-guide.pdf" id="Roving Networks RN-24 Usage Guide" name="Roving Networks RN-24 Usage Guide" target="_blank"></a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/67" target="_blank">Check out our Bluetooth Tutorial</a></li>


</ul>


moduleID: Level-Converter-v11
family: level shifter
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Logic Level Converter
date: 2011-07-08
path: core/Level-Converter-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> If you&#39;ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works with 2.8V and 1.8V devices. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side. Two inputs and two outputs are provided for each side.<br />


	<br />


	Bread board friendly! Can be used with normal serial, I2C, SPI, and any other digital signal. Does not work with an analog signal.<br />


	<br />


	The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the &#39;HV&#39; pin, low voltage (2.8V for example) to &#39;LV&#39;, and ground from the system to the &#39;GND&#39; pin.<br />


	<br />


	Pins are labeled as <span style="font-weight: bold;">I</span>nputs and <span style="font-weight: bold;">O</span>utputs. These are relative to the board. A digital one going into the RXI pin on the 5V side will show up on the RXO pin on the 3.3V side as 3.3V. A digital one going into the TXI pin on the 3.3V side will show up on the TXO pin on the 5V side as 5V.<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 0.5x0.6&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span> <a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Level-Converter-v10.pdf" target="_blank">Schematic</a></p>


moduleID: ITG-3200-v11
family: gyroscope breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Triple Axis Gyro Breakout ITG-3200
date: 2011-07-08
path: core/ITG-3200-v11.fzp
description:
<p>


	<strong>Description: </strong>This is a breakout board for InvenSense&#39;s ITG-3200, a groundbreaking triple-axis, digital output gyroscope. The ITG-3200 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyro outputs, a user-selectable internal low-pass filter bandwidth, and a Fast-Mode I<sup>2</sup>C (400kHz) interface. Additional features include an embedded temperature sensor and a 2% accurate internal oscillator.</p>


<p>


	The ITG-3200 can be powered at anywhere between 2.1 and 3.6V. For power supply flexibility, the ITG-3200 has a separate VLOGIC reference pin (labeled VIO), in addition to its analog supply pin (VDD) which sets the logic levels of its serial interface. The VLOGIC voltage may be anywhere from 1.71V min to VDD max. For general use, VLOGIC can be tied to VCC. The normal operating current of the sensor is just 6.5mA.</p>


<p>


	Communication with the ITG-3200 is achieved over a two-wire (I<sup>2</sup>C) interface. The sensor also features a interrupt output, and an optional clock input. A jumper on the top of the board allows you to easily select the I<sup>2</sup>C address, by pulling the AD0 pin to either VCC or GND; the board is shipped with this jumper tied to VCC. If you don&#39;t plan on using the CLKIN pin, you can short the jumper on the bottom of the board to tie it to GND.</p>


<p>


	This breakout board is shipped as shown in the images. Note that there are two <em>unpopulated</em> resistors on the I<sup>2</sup>C lines, these can be added later by the customer if desired.</p>


<p>


	Not sure which gyro is right for you? Our <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=167" target="_self">Accelerometer and Gyro Buying Guide</a> might help!</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Digital-output X-, Y-, and Z-Axis angular rate sensors (gyros) on one integrated circuit</li>


	<li>


		Digitally-programmable low-pass filter</li>


	<li>


		Low 6.5mA operating current consumption for long battery life</li>


	<li>


		Wide VDD supply voltage range of 2.1V to 3.6V</li>


	<li>


		Standby current: 5&mu;A</li>


	<li>


		Digital-output temperature sensor</li>


	<li>


		Fast Mode I<sup>2</sup>C (400kHz) serial interface</li>


	<li>


		Optional external clock inputs of 32.768kHz or 19.2MHz to synchronize with system clock</li>


	<li>


		Pins broken out to a breadboard friendly 7-pin 0.1&quot; pitch header</li>


</ul>


<p>


	<strong>Dimensions: </strong>0.70 x 0.55&quot; (17.78 x 13.97mm)</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/ITG-3200-v10.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/265" target="_blank">Quickstart Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/PS-ITG-3200-00-01.4.pdf" target="_blank">ITG-3200 Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/IDG-3200-ATmega328-4-30-10.zip" target="_blank">Example Code</a> (ATmega328)</li>


	<li>


		<a href="http://mbed.org/cookbook/ITG-3200-Gyroscope" target="_blank">mbed Example</a></li>


</ul>


moduleID: BMP085 Breakout-v13
family: pressure sensor breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Barometric Pressure Sensor - BMP085 Breakout
date: 2011-07-08
path: core/BMP085 Breakout-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This is a simple breakout board for the BMP085 high-precision, low-power barometric pressure sensor. The BMP085 offers a measuring range of 300 to 1100 hPa with an absolute accuracy of down to 0.03 hPa. It&#39;s based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability. This sensor supports a voltage supply between 1.8 and 3.6VDC. It is designed to be connected directly to a micro-controller via the I&sup2;C bus</p>


<p>


	This breadboard-friendly board breaks out all pins of the BMP085 to a 6-pin 0.1&quot; pitch header. The analog and digital supplies (VDDD and VDDA) of the BMP085 are tied together and broken out to a single pin. We&#39;ve also put two 4.7k pull-up resistors on the I<sup>2</sup>C lines.<br />


	<br />


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Digital two wire (I<sup>2</sup>C) interface</li>


	<li>


		Wide barometric pressure range</li>


	<li>


		Flexible supply voltage range</li>


	<li>


		Ultra-low power consumption</li>


	<li>


		Low noise measurement</li>


	<li>


		Fully calibrated</li>


	<li>


		Temperature measurement included</li>


	<li>


		Ultra-flat, small footprint</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		0.65 x 0.65&quot; (16.5 x 16.5 mm)</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Pressure/BMP085 Breakout-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/General/BST-BMP085-DS000-05.pdf" name="" target="_blank">Datasheet</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Weather/BMP085 Breakout-v13.zip">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorials/253">Quickstart Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/tutorial/Barometric/BMP085_Example_Code.pde" target="_blank">Example Arduino Sketch</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Pressure/BMP085 Example Code.zip" target="_blank">Example Code</a> (ATmega328)</li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/General/BMP085_Flyer_Rev.0.2_March2008.pdf" name="" target="_blank">Product Flyer</a></li>


	<li>


		<a classname="" href="http://www.opencircuits.com/SFE_Footprint_Library_Eagle" name="" target="_blank">SFE Eagle Library</a> has this part!</li>


	<li>


		<a href="http://wiring.org.co/learning/libraries/bmp085.html" target="_blank">Wiring Example</a></li>


	<li>


		<a href="http://mbed.org/users/tkreyche/notebook/bmp085-pressure-sensor/" target="_blank">mbed User Review</a></li>


</ul>


moduleID: 371230f4269dfda53ae3cc123cd5fdb4
family: microcontroller board (arduino)
fritzingversion: 0.3.21b.04.28.4164
author: Lionel Michel
title: Arduino Mini
label: Arduino
date: 2010-04-30
path: core/Arduino Mini.fzp
description:
    The Arduino Mini is a small microcontroller board based on the ATmega168 (datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. It can be programmed with the Mini USB adapter or other USB or RS232 to TTL serial adapter.
    
    http://arduino.cc/en/Main/ArduinoBoardMini


moduleID: Arduino-Ethernet-v11
family: arduino
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Ethernet Pro
date: 2011-11-29
path: core/Arduino-Ethernet-v11.fzp
description:
<p>


	<strong>Description:</strong> Ever wonder what would happen if you stacked an Ethernet shield on an Arduino Pro microcontroller and ran over it with a steam roller? Well, it would probably just break. But in a cartoon world it might turn into the Ethernet Pro! The Ethernet Pro is an Arduino-sized, shield-compatible microcontroller with all of the functionality of the Ethernet shield built right in!</p>


<p>


	The Ethernet Pro is based on the same hardware as the Ethernet shield (Wiznet W5100) in the same configuration so it is a drop-in replacement for the &quot;Arduino/Ethernet double-stack,&quot; and works with all of the existing Ethernet shield libraries and code. This board features the &#39;Optiboot&#39; bootloader, so be sure to select &quot;Arduino Uno&quot; in the Arduino IDE when you program it. The board can be programmed using either an FTDI Basic or the ATmega8U2 breakout (w/ USB-to-Serial firmware).</p>


<p>


	<strong>Documents: </strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Boards/Arduino-Ethernet-v112pg.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Boards/Arduino-Ethernet-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/W5100_Datasheet_v1_1_6.pdf" target="_blank">Datasheet</a> (W5100)</li>


	<li>


		<a href="http://arduino.cc/en/Main/ArduinoEthernetShield" target="_blank">Arduino EthernetShield Page</a></li>


</ul>


moduleID: Si470x-Eval-v11
family: radio breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Digital FM Radio Receiver
date: 2011-07-08
path: core/Si470x-Eval-v11.fzp
description:
<p>


	<strong>Description:</strong> This is a breakout board for the Silicon Laboratories Si4703 FM tuner chip. Beyond being a simple FM radio, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and Radio Broadcast Data Service (RBDS) information. The Si4703 even does a very good job of filtering and carrier detection. It also enables data such as the station ID and song name to be displayed to the user.</p>


<p>


	Using this board we are able to pick up multiple stations just as well as with a standard FM radio. The board breaks out all major pins and makes it easy to incorporate this great chip into your next radio project. Also, by plugging headphones into the 3.5mm audio jack, you effectively use the cable in your headphones as an antenna! Therefore, this board does not require an external antenna if using headphones or a 3.5mm audio cable longer than 3 feet.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si470x-Eval-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si470x-Eval-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si4702-03-C19-1.pdf">Datasheet</a> (Si4703)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/tpa6111a2.pdf" target="_blank">Datasheet</a> (TPA6111A2)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/Si4703_Example.pde" target="_blank">Arduino Example Code</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/AN230_0.61.pdf" target="_blank">Programming Guide</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/8972" target="_blank">WRL-08972</a></p>


moduleID: 054b3d1b56ef5470113b3e56d5dfc532
family: voltage regulator
fritzingversion: 0.6.3b.08.16.5401
author: Carlos Hansen Mendoza
title: KA78R05 Low Dropout Voltage Regulator
label: VREG
date: 2011-11-15
path: core/KA78R05_Low_Dropout_Voltage_Regulator.fzp
description:
A low-dropout or LDO regulator is a DC linear voltage regulator which can operate with a very small input–output differential voltage. The advantages of a low dropout voltage include a lower minimum operating voltage, higher efficiency operation and lower heat dissipation. [Wikipedia]


moduleID: Op Amp Breakout-v16
family: amplifier breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: OpAmp Breakout
date: 2011-07-08
path: core/Op Amp Breakout-v16.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a simple Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed. The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/OpAmp_Breakout-v16.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://focus.ti.com/lit/ds/symlink/lmv324.pdf" target="_blank">LMV358 datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/OpAmp_Breakout-v16.zip" target="_blank">Eagle Files</a></li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8704">BOB-08704</a></p>


moduleID: Ardumoto v13
family: motor shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Motor Shield
date: 2011-07-08
path: core/Ardumoto v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> The new version of this shield allows for either 3.3 or 5v logic, a separate and more robust VIN connection, and the PWM input has moved to pin 3.</p>


<p>


	This is a motor shield for Arduino&nbsp;that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board,&nbsp; includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF.<br />


	<br />


	Control for motor attached to OUT1/2 is connected to digital line 12 (direction A) and digital line 3 (PWM A).<br />


	<br />


	Control for motor attached to OUT3/4 is connected to digital line 13 (direction B) and digital line 11 (PWM B).<br />


	<br />


	Compatible screw terminals and connectors are listed below.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Ardumoto_v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Ardumoto%20v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Robotics/L298_H_Bridge.pdf" name="" target="_blank">L298 H Bridge data sheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Ardumoto_test_3.pde" target="_blank">Example Arduino sketch</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=183" target="_blank">Assembly Guide</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=195" target="_blank">Quickstart Guide</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9213" target="_blank">DEV-09213</a></p>


moduleID: SI4735 Shield-v13
family: radio
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Si4735 AM & FM Receiver Shield
date: 2011-11-29
path: core/SI4735 Shield-v13.fzp
description:
<p>


	<strong>Description:</strong> The Si4735 is the first digital CMOS AM/FM radio receiver IC that integrates the complete tuner function from antenna input to audio output. This feature-rich solution includes advanced seek algorithms, soft mute, auto-calibrated digital tuning, and FM stereo processing. The chip also incorporates a digital processor for the European Radio Data System (<a href="http://en.wikipedia.org/wiki/Radio_Data_System" target="_blank">RDS</a>) and the North American Radio Broadcast Data System (<a href="http://en.wikipedia.org/wiki/RBDS" target="_blank">RBDS</a>), including all required symbol decoding, block synchronization, error detection, and error correction functions. Basically it&#39;s an entire AM/FM, LW/SW radio in a single chip.</p>


<p>


	Now that we&#39;ve mounted it on a shield, you can harness all of that sweet radio-playing power right from your Arduino. Simply stack the shield onto your Arduino board, plug in some speakers (headphones don&#39;t seem to work as well without a preamp) and use the library below to control the volume, channel selection, etc. The library also allows you to send a variety of other commands constructed by consulting the Si4735 Programmers Guide.</p>


<p>


	This board seems to get decent reception compared to other stereos around the office even using a simple wire antenna. If you happen to have an antenna that you&#39;d like to use it can be soldered right to the via marked &quot;antenna&quot;.</p>


<p>


	<strong>Documents: </strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/SI4735 Shield-v13.pdf" target="_blank">Schematic </a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/SI4735 Shield-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735 Datasheet.pdf" target="_blank">Datasheet</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735.zip" target="_blank">Arduino Library</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Si4735 Programming Guide.pdf" target="_blank">Programming Guide</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/RBDS Standard.pdf" target="_blank">RBDS Standard</a></li>


</ul>


moduleID: FTDI Basic-v13
family: ftdi
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: FTDI Basic Programmer
date: 2011-07-08
path: core/FTDI Basic-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is the newest revision of our <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9115">FTDI Basic</a>. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.</p>


<p>


	This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.<br />


	<br />


	The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.<br />


	<br />


	This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.<br />


	<br />


	This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.<br />


	<br />


	One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.<br />


	<br />


	<span style="font-weight: bold;">Documents: </span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/FTDI%20Basic-v21-5V.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/FTDI Basic-v21-5V.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.google.com/url?sa=t&amp;ct=res&amp;cd=1&amp;url=http%3A%2F%2Fwww.ftdichip.com%2FFTDrivers.htm&amp;ei=D7WlSMGOJKOKiAGx-82BDQ&amp;usg=AFQjCNE2pWdUmKFsw6OAb9hwsC8CtftzFQ&amp;sig2=HQApwDh2F68V38PkMHy6jg" target="_blank">FTDI Drivers</a></li>


</ul>


moduleID: Tricolor-LED v16
family: led
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Tri-Color LED
date: 2011-07-08
path: core/Tricolor-LED v16.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design - to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel.<br />


	<br />


	LilyPad is a wearable technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		20mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-TriColorLED.pdf" target="_blank">Schematic</a></li>


	<li>


		LilyPad Tri-Color LED Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-Tri-ColorLED-08467.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


moduleID: 22b3bd892734fe28cfbcd54edd4c2a6a
family: ic
version: 4
fritzingversion: 0.7.0b.02.01.5801
author: jonathan
title: STM32F103
label: U
date: 2011-04-06
path: core/STM32F103.fzp
description:
Medium density Cortex-M3 microcontroller. http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00161566.pdf


moduleID: 9DoF-Stick-v13
family: imu
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: 9 Degrees of Freedom - Sensor Stick
date: 2011-11-29
path: core/9DoF-Stick-v13.fzp
description:
<div class="description">


	<p>


		<strong>Description:</strong> The 9DOF Sensor stick is a very small sensor board with 9 degrees of freedom. It includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the ITG-3200 gyro. The &#39;stick&#39; has a simple I2C interface and a mounting hole for attaching it to your project. Also, the board is a mere 0.036&quot; thick (0.093&quot; overall), allowing it to be easily mounted in just about any application.</p>


	<p>


		<strong>Dimensions:</strong> 1.37x0.42&quot;</p>


	<p>


		<strong>Documents:</strong></p>


	<ul>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/9DoF-Stick-v13.pdf" target="_blank">Schematic</a></li>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/IMU/9DoF-Stick-v13.zip" target="_blank">Eagle Files</a></li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/Sensors/Accelerometer/ADXL345.pdf" target="_blank">Datasheet</a> (ADXL345)</li>


		<li>


			<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Magneto/HMC5883L-FDS.pdf" target="_blank">Datasheet</a> (HMC5883L)</li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/Sensors/Gyro/PS-ITG-3200-00-01.4.pdf" target="_blank">Datasheet</a> (ITG-3200)</li>


	</ul>


	<p>


		<strong>Replaces: </strong><a href="http://www.sparkfun.com/products/10321" target="_blank">SEN-10321</a></p>


</div>


moduleID: LilyPad-Accelerometer-v17
family: accelerometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Accelerometer ADXL335
date: 2011-07-08
path: core/LilyPad-Accelerometer-v17.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 accelerometer from Analog Devices, the LilyPad Accelerometer can detect joint movement as well as inclination and vibration.<br />


	<br />


	The ADXL335 outputs a 0V to 3V analog signal on each of the X, Y, and Z axis. You will need to convert this analog voltage to a gravity amount and use trigonometry to calculate a true &#39;angle&#39;. If you are not looking for tilt, it is very easy to use this sensor for basic motion sensing.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		20mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Accelerometer-v17.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/ADXL335.pdf" name="" target="_blank">ADXL335 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Accelerometer-v17Eagle.zip" name="" target="_blank">Eagle files</a> released under the Creative Commons Attribution</li>


	<li>


		Example <a href="http://www.pyrofersprojects.com/3dcube.php" target="_blank">3D cube project</a> using a PIC</li>


</ul>


moduleID: gs1011_breakout-v11
family: wireless
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: GainSpan WiFi Breakout
date: 2011-11-29
path: core/gs1011_breakout-v11.fzp
description:
<p>


	<strong>Description:</strong> This is a breakout for the GS1011 ultra low-power wireless chip from GainSpan. The GS1011 device is a highly integrated ultra low power wireless single chip which contains an 802.11b radio, media access controller (MAC) and baseband processor, on-chip flash memory and SRAM, and an applications processor all on a single package. Along with its embedded software stack it offers a highly scalable, reliable, manageable and secure wireless link to meet the growing demand of wireless sensor networks utilizing the broadly accepted IEEE 802.11b,g,n standards infrastructure.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Supports IEEE 802.11</li>


	<li>


		Seamlessly integrates with existing 802.11b/g infrastructure and utilizes the 802.11 security, manageability, ease-of-use, and quality of service</li>


	<li>


		802.11i/WPA2 Authentication, AES Hardware encryption</li>


	<li>


		Optimized for battery powered application with very low power consumption for multiple years of battery life</li>


	<li>


		Range 200-300M+ Outdoor (Typical Estimate)</li>


	<li>


		Two 32-bit ARM7 CPU @44MHz, 1 for applications (APP) : 1 dedicated to radio (WLAN)</li>


	<li>


		2 UART , I2C, 2 SPI, 2 ADC, 1 PWM, and 32 GPIO</li>


	<li>


		Operates at 3.3V</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/gs1011_breakout-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/gs1011_breakout-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/GS1011M Datasheet ver 1.0.pdf" target="_blank">Datasheet</a> (GS1011)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Wireless/WiFi/Serial_to_WiFi_Adapter_Guide ver 5_3.pdf" target="_blank">Command Set</a></li>


</ul>


moduleID: DeadOn RTC - DS3234 Breakout-v11
family: real time clock breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: DeadOn RTC - DS3234 Breakout
date: 2011-07-08
path: core/DeadOn RTC - DS3234 Breakout-v11.fzp
description:
<p>


	<strong>Description:</strong> Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal.</p>


<p>


	The RTC maintains seconds, minutes, hours, day, date, month, and year information. The date at the end of the month is automatically adjusted for months with fewer than 31 days, including corrections of leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. Two programmable time-of-day alarms and a programmable square-wave output are provided.</p>


<p>


	The underside of the board holds a 12mm coin-cell battery holder for battery backup.</p>


<p>


	<strong>Note:</strong> These do not include a battery. See the related products below for a battery.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		+-2ppm accuracy</li>


	<li>


		Two alarms</li>


	<li>


		SPI output</li>


	<li>


		Low power consumption</li>


	<li>


		Accurate calendar up to year 2100</li>


	<li>


		Battery backup included</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/DeadOn%20RTC%20-%20DS3234%20Breakout-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/DeadOn RTC - DS3234 Breakout-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/DS3234.pdf" target="_blank">Datsheet</a> (DS3234)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/BreakoutBoards/DS3234_Example_Code.c" target="_blank">Example Code</a></li>


</ul>


moduleID: PowerIR-v11
family: ir
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Max Power IR LED Kit
date: 2011-11-29
path: core/PowerIR-v11.fzp
description:
<p>


	<strong>Description:</strong> Infrared LEDs are awesome. Along with an IR receiver they can be used for remote control and even basic remote data communication. The only problem is that your Arduino won&#39;t drive them to their full potential. The Max Power IR LED kit solves this problem by providing you with everything you need to drive a 950nm IR LED properly. Simply solder together this easy through-hole kit and you can switch the LED using a transistor.</p>


<p>


	Once the kit is assembled, simply provide it with voltage (5V), ground, and connect the CTL pin to a digital pin on your Arduino, and you can drive this kit just like a normal LED.&nbsp; Although the LED won&#39;t be visible to your naked eye, you can use a video camera, cell phone camera, or digital camera to see if the LED is working properly.</p>


<p>


	<strong>Note:</strong> This revision fixes our mistake from the last version and should now source the 50mA maximum current that the LED is rated for.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Kits/PowerIR-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Kits/PowerIR-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/Infrared/YSL-R531FR1C-F1.pdf" name="" target="_blank">Datasheet</a> (IR LED)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/10662" target="_blank">KIT-10662</a></p>


moduleID: LilyPad-Button-v12
family: button
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Button Board
date: 2011-07-08
path: core/LilyPad-Button-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> We designed this board to give the user a very discrete button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		8x16mm</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Button.pdf" target="_blank">Schematic</a></li>


	<li>


		LilyPad Button Board Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-ButtonBoard-08776.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


moduleID: LilyPad_LED-v14
family: led
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad LED
date: 2011-07-08
path: core/LilyPad_LED-v14.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> A simple, very bright, 250mcd, white LED LilyPad. Light up the night!<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		5x11mm</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-LED.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/APT3216QWF-D.pdf" target="_blank">LED Datasheet</a></li>


	<li>


		LilyPad Bright White LED Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-BrightWhiteLED-08735.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/8735" target="_blank">DEV-08735</a></p>


moduleID: HMC5883L_Breakout-v11
family: magnetometer breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Triple Axis Magnetometer - HMC5883 Breakout
date: 2011-07-08
path: core/HMC5883L_Breakout-v11.fzp
description:
This is a breakout board for Honeywell's HMC5883, a 3-axis digital compass. Communication with the HMC5883 is simple and all done through an I2C interface. There is no on-board regulator, so a regulated voltage of 2.16-3.6VDC should be supplied.



The breakout board includes the HMC584843 sensor and all filtering capacitors as shown. The power and 2-wire interface pins are all broken out to a 0.1" pitch header.



Features:



   * Simple I2C interface

   * 2.16 to 3.6VDC supply range

   * Low current draw

   * 5 milli-gauss resolution



Dimensions: 0.7x0.7" (17.78x17.78mm) 


moduleID: quadstep-v12
family: motor controller
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: QuadStepper
date: 2011-07-08
path: core/quadstep-v12.fzp
description:
<p>


	<strong>Description:</strong> The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 2Amps. The board is capable of driving motors in full, half, quarter, eight, and sixteenth-step modes. The logic levels are selectable between 3.3V and 5V by way of a jumper. The bus header allows you to control all four motors with only 6 IO pins by controlling the enable (EN pins) for each motor, although each motor will be activated alone, not simultaneously. Be sure to close all of the &#39;Bus Enable&#39; jumpers on the back of the board in order to use the Bus header.</p>


<p>


	The Quadstepper is a great board for 3D printing applications as well as a host of other applications where it&#39;s necessary to control precise movement from logic level IO pins.</p>


<p>


	<strong>Note:</strong> Although this board can theoretically supply 2A per motor, you will run into heat issues if you do not have proper thermal management (ie - heatsinks). Without heatsinking, you can expect to drive each motor up to 1A, which would be fine for our <a href="http://www.sparkfun.com/products/9238" target="_blank">stepper motors</a>, or something similar.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Can control up to 4 bipolar stepper motors simultaneously.</li>


	<li>


		Each motor driver has an output drive capacity of 35V and 2Amps.</li>


	<li>


		Capable of driving motors in full, half, quarter, eight, and sixteenth-step modes.</li>


	<li>


		Power input (barrel jack) needs to be less than 30V and supply enough current for your specific stepper motors.</li>


	<li>


		Jumper (labeled &quot;5V&quot;) controls power to the motor drivers, logic levels, and VOUT pin, selectable 3.3/5V.</li>


	<li>


		Bus header allows you to control all four motors with only 6 IO pins by controlling the enable (EN pins) for each motor</li>


	<li>


		2.1mm, center positive barrel jack</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Widgets/quadstep-v11assembly.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Widgets/quadstep-v11assembly.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Widgets/A4983SETTR-T-Allegro-datasheet-123643.pdf" target="_blank">Datasheet</a> (A4983SETTR-T)</li>


</ul>


moduleID: audiojack_breakout-v11
family: audio breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Audio Jack Breakout
date: 2011-07-08
path: core/audiojack_breakout-v11.fzp
description:
<p>


	<strong>Replacement:</strong> <a href="http://www.sparkfun.com/products/10588" target="_blank">PRT-10588</a>. The new revision corrects the silkscreen so that the pins are now labeled correctly. This page is for reference only.</p>


<p>


	<span style="font-weight: bold;">Description:</span> Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.<br />


	<br />


	<strong><span style="font-weight: bold;">Note: </span></strong>This is for the bare PCB only.</p>


<p>


	<strong>Note:</strong> The silkscreen is incorrect. We are working on a revision. However, the board is still usable, but the labeling isn&#39;t even close to correct. Here is the correct pin labeling (from top to bottom):</p>


<ul>


	<li>


		GND (Ground)</li>


	<li>


		RNG (Ring)</li>


	<li>


		RSH (Ring Shunt)</li>


	<li>


		TIP (Tip)</li>


	<li>


		TSH (Tip Shunt)</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span> <a href="http://www.sparkfun.com/datasheets/BreakoutBoards/audiojack_breakoutsch.pdf" target="_blank">Schematic</a></p>


moduleID: ProtoShield-Mini-v12
family: prototype shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Mini Proto Shield
date: 2011-07-08
path: core/ProtoShield-Mini-v12.fzp
description:
<p>


	<strong>Description: </strong>This is a small prototyping shield for the Arduino Pro Mini. If your project requires just a little bit more space for your external circuitry, this might be a perfect addition. 38 unconnected PTHs are provided for your prototyping needs.</p>


<p>


	The shield fits the small form factor of the Arduino Pro Mini - connecting to the &#39;top&#39; four pins on each side of the Mini (&#39;GND&#39;-&#39;TXO&#39; &amp; &#39;VCC&#39;-&#39;RAW&#39;). There are small buses for VCC, GND and RAW. In addition to the power buses, the serial pins are also broken out on the shield. The analog and digital pins are not broken out on the shield.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		VCC, RAW and GND buses</li>


	<li>


		Serial (RXI &amp; TXO) pins broken out to small buses</li>


	<li>


		Works with both 5V and 3.3V Pro Mini versions</li>


	<li>


		Upholds the Pro Mini&#39;s small form factor</li>


	<li>


		38 unconnected PTHs for prototyping</li>


</ul>


moduleID: MonsterMoto-Shield-v12
family: motor controller
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Monster Moto Shield
date: 2011-11-29
path: core/MonsterMoto-Shield-v12.fzp
description:
<p>


	<strong>Description:</strong> This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we&#39;ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We&#39;ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.</p>


<p>


	<strong>Note:</strong> When using this board in extreme high-demand applications it may be necessary to improve thermal performance with a heat-sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a 30A system) However, when using the board at currents up to 6A the chips will barely become noticeably warm.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Voltage max: 41V</li>


	<li>


		Maximum current rating: 30 A</li>


	<li>


		Current sensing available to Arduino analog pin</li>


	<li>


		MOSFET on-resistance: 19 m&Omega; (per leg)</li>


	<li>


		Maximum PWM frequency: 20 kHz</li>


	<li>


		Thermal Shutdown</li>


	<li>


		Undervoltage and Overvoltage shutdown</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MonsterMoto-Shield-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MonsterMoto-Shield-v12.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/10832.pdf" target="_blank">Datasheet</a> (VNH2SP30)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MonsterMoto_Shield_Example.pde" target="_blank">Example Code</a></li>


</ul>


moduleID: TEMT6000_Breakout-v12
family: light sensor breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Ambient Light Sensor (TEMT6000 Breakout Board)
date: 2011-07-08
path: core/TEMT6000_Breakout-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don&#39;t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Imaging/TEMT6000.pdf" name="" target="_blank">Datasheet</a></li>


	<li>


		<a classname="" href="http://wiring.org.co/learning/basics/ambientlighttemt6000.html" name="" target="_blank">Wiring Example</a></li>


</ul>


moduleID: 81591c6c31ccf12f0f3ccec5f150df2d
family: usb-to-serial adapter
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: andre
title: Wiring USB Adapter
label: USB
date: 2010-04-11
path: core/usbadapter_wiring.fzp
description:
The Wiring USB Adapter connects the Wiring Mini to a host computer. It uses an FTDI FT232R to convert between USB and RS-232 serial commands.


moduleID: FTDI Basic-v13_lily
family: ftdi
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: FTDI Basic Programmer
date: 2011-11-16
path: core/FTDI Basic-v13_lily.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is the LilyPad revision of our <a href="http://www.sparkfun.com/products/9716">FTDI Basic</a>. It is the same as our other FTDI Basic, but has a purple LilyPad board which is half the thickness.</p>


<p>


	This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.<br />


	<br />


	The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.<br />


	<br />


	This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.<br />


	<br />


	This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.<br />


	<br />


	One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship as 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.</p>


<p>


	<strong>Note:</strong> A portion of this sale is given back to Dr. Leah Buechley for continued development and education of e-textiles.<br />


	<br />


	<span style="font-weight: bold;">Documents: </span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad%20FTDI%20Basic-v21-5V.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad FTDI Basic-v21-5V.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.google.com/url?sa=t&amp;ct=res&amp;cd=1&amp;url=http%3A%2F%2Fwww.ftdichip.com%2FFTDrivers.htm&amp;ei=D7WlSMGOJKOKiAGx-82BDQ&amp;usg=AFQjCNE2pWdUmKFsw6OAb9hwsC8CtftzFQ&amp;sig2=HQApwDh2F68V38PkMHy6jg" target="_blank">FTDI Drivers</a></li>


</ul>




moduleID: Proto_shield_REV3
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Arduino
title: Arduino Prototyping Shield
date: 2012-03-10
path: core/Proto_shield_REV3.fzp
description:
The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the Arduino I/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom circuit and Arduino into a single module.


moduleID: fd1b41f61d75a154da35b6f6bd5cca72
family: obsolete microcontroller board (arduino)
version: 4
fritzingversion: 0.4.2b.07.24.4368
author: Lionel Michel
title: Arduino Mini Pro
label: Arduino Mini Pro
date: 2010-07-27
path: obsolete/Arduino Mini Pro.fzp
description:
The Arduino Pro Mini is a microcontroller board based on the ATmega168. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.


moduleID: FTDI Basic-v13_3.3v
family: ftdi
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Sparkfun
title: FTDI Basic Programmer
date: 2011-11-16
path: core/FTDI Basic-v13_3.3v.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is the newest revision of our <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8772">FTDI Basic</a>. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.</p>


<p>


	This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.<br />


	<br />


	The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is DTR. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.<br />


	<br />


	There are pros and cons to the FTDI Cable vs the FTDI Basic. This board has TX and RX LEDs that allow you to actually see serial traffic on the LEDs to verify if the board is working, but this board requires a Mini-B cable. The FTDI Cable is well protected against the elements, but is large and cannot be embedded into a project as easily. The FTDI Basic uses DTR to cause a hardware reset where the FTDI cable uses the RTS signal.<br />


	<br />


	This board was designed to decrease the cost of Arduino development and increase ease use (the auto-reset feature rocks!). Our Arduino Pro and LilyPad boards use this type of connector<br />


	<br />


	<span style="font-weight: bold;">Documents: </span></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/FTDI Basic-v22-3.3V.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/FTDI Basic-v22-3.3V.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.google.com/url?sa=t&amp;ct=res&amp;cd=1&amp;url=http%3A%2F%2Fwww.ftdichip.com%2FFTDrivers.htm&amp;ei=D7WlSMGOJKOKiAGx-82BDQ&amp;usg=AFQjCNE2pWdUmKFsw6OAb9hwsC8CtftzFQ&amp;sig2=HQApwDh2F68V38PkMHy6jg" target="_blank">FTDI Drivers</a></li>


</ul>




moduleID: Wireless_SD_v3
family: arduino shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Arduino
title: Arduino Wireless SD Shield
date: 2012-03-10
path: core/Wireless_SD_v3.fzp
description:
The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad.

Included on board is a SD card slot. When using the SD Library to access the card, Pin 4 is CS and cannot be used otherwise. SPI also relies on pins 11, 12, and 13 for communication.

Also on board is a switch allowing for control via USB or the microcontroller.


moduleID: bf73a00d2ecd04be25675ebfb2d130c0
family: humidity breakout
fritzingversion: 0.7.0b.02.01.5801
author: wreutz
title: Humidity Temperature Sensor SHT15
date: 2012-02-20
path: core/Humidity_Sensor_SHT15.fzp
description:
<p><b>Description:</b></p>
      <p>This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15 digital humidity and temperature sensor is fully calibrated and offers high precision and excellent long-term stability at low cost. The digital CMOSens Technology integrates two sensors and readout circuitry on one single chip.

      These sensors are really impressive! Very sensitive and straight forward to use. Board comes assembled and tested with the SHT15.</p>

      <p><b>Features:</b></p>

<ul>
	<li>2 factory calibrated sensors for relative humidity & temperature</li>
	<li>Digital 2-wire interface</li>
	<li>Precise dewpoint calculation possible</li>
	<li>Measurement range: 0-100% RH</li>
	<li>Absolute RH accuracy: +/- 2% RH (10...90% RH)</li>
	<li>Repeatability RH: +/- 0.1% RH</li>
	<li>Temp. accuracy: +/- 0.3°C @ 25°C</li>
	<li>Fast response time < 4 sec.</li>
	<li>Low power consumption (typ. 30 µW)</li>
	<li>Low cost</li>
	<li>High precision sensor at low cost</li>
	<li>Leading CMOSens Technology for superior long-term stability</li>
</ul>

<p><b>Applications:</b></p>

<ul>
	<li>Precise data logging</li>
	<li>Transmitters</li>
	<li>Automation & process control</li>
	<li>Building control and HVAC</li>
	<li>Test & Measurement</li>
	<li>Medical</li>
</ul>

<p><b>Documents:</b></p>

<ul>
  <li>
    <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Pressure/SHT1x-Breakout-v13.pdf" name="" target="_blank">Schematic</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Pressure/SHT1x-Breakout-v13.zip" name="" target="_blank">Eagle Files</a></li>
  </li>
  <li>
    <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Datasheet-humidity-sensor-SHT1x.pdf" name="" target="_blank"> SHT1x Datasheet</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/SHT15-Testing-v11.zip" name="" target="_blank">Example C Code (PIC 16F88)</a></li>
  </li>
  <li>
     <a classname="" href="http://wiring.org.co/learning/basics/humiditytemperaturesht15.html" name="" target="_blank">Wiring Example</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/en/02_sensors/03_humidity/00_humidity_temperature_sensor/03_humidity_sensor_sht15.htm" name="" target="_blank">Application Notes</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/images/getFile?id=11" name="" target="_blank">Calibration Certificate</a></li>
  </li>
  <li>
     <a classname="" href="http://www.sensirion.com/images/getFile?id=123" name="" target="_blank">RoHS Certificate</a></li>
  </li>
</ul>


moduleID: a0bc75e3536cc51ac28b344cead00745
family: microcontroller board (teensy)
fritzingversion: 0.4.4b.10.03.4492
author: Lionel Michel
title: Teensy 2.0
label: Teensy
date: 2010-10-29
path: core/Teensy 2.0.fzp
description:
The Teensy is a complete USB-based microcontoller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. No special programmer is needed, only a standard "Mini-B" USB cable and a PC or Macintosh with a USB port.


moduleID: 1e03b5a0-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 12 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.12pins
path: obsolete/mystery_part12.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 12 pins on a 100 mil inline pin header footprint.


moduleID: OpenLog
family: data logger
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Andre Knoerig
title: OpenLog
date: 2012-02-02
path: core/OpenLog.fzp
description:
OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked. Power up this device and it will start logging any received serial data at 9600bps.


moduleID: 5f7b51547fafb902305f5b3cbb81bb74
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2p 40-Pin
label: BS
date: 2009-04-12
path: core/BASIC_Stamp_2p40.fzp
description:
The BASIC Stamp 2p40 serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: PWM-Shield-v12
family: pwm
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: PWM Shield
date: 2011-11-29
path: core/PWM-Shield-v12.fzp
description:
<p>


	<strong>Description:</strong> This is the Arduino shield version of our TLC5940 Breakout. The PWM Shield will allow you to generate up to 16 PWM signals from your Arduino by utilizing the power of the TLC5940 IC. All 16 PWM channels are broken out to standard 0.1&quot; headers, which run alongside convenient voltage and ground rails. Because the IC can be daisy-chained, output headers are broken out on one side of the shield and can be connected to our TLC5940 Breakout to further expand your PWM capabilities.&nbsp;</p>


<p>


	Use this board to increase the number of PWM pins available to your microcontroller for applications such as monocolor, multicolor or full-color LED displays, LED signboards, display backlighting, servo control, or any other project where a large number of PWM drivers are necessary.</p>


<p>


	<strong>Note: </strong>While each 3-pin PWM header is 0.1&quot; spaced, the space between each header is slightly larger in order to accommodate servo connections. In order to make this board suitable for use with servos, 2.2k pull-up resistors have been included on each output as well. Finally, the 2.2k resistor on the Iref pin sets the output current to 17.8mA but a parallel through-hole connection is provided for an additional resistor to increase the current if necessary. To determine the resistor value you need for a given output check the equations provided on the schematic below.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/PWM-Shield-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/PWM-Shield-v12.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/General/tlc5940.pdf" target="_blank">Datasheet</a> (TLC5940)</li>


	<li>


		<a href="http://code.google.com/p/tlc5940arduino/" target="_blank">Arduino Library</a></li>


	<li>


		<a href="http://www.arduino.cc/playground/Learning/TLC5940" target="_blank">Arduino Example</a></li>


</ul>


moduleID: 5DOF-v25
family: imu
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: IMU Analog Combo Board - 5 Degrees of Freedom
date: 2011-07-08
path: core/5DOF-v25.fzp
description:
<p>


	<b>Description:</b> This Inertia Measurement Unit Combo Board incorporates the IDG500 dual-axis gyroscope and Analog Devices triple axis ADXL335 accelerometer in a tight footprint. The IMU board uses a standard 0.1&quot; footprint and includes all outputs from both the IDG500 gyro and ADXL335 accelerometer ICs.</p>


<p>


	This IMU 5DOF is the latest in a long line of development boards. This latest version allows an unheard of 5 axis of sensing (Roll, Pitch, X, Y, Z) in less than 1 square inch, and under 2 grams!</p>


<p>


	By combining the IDG500 and ADXL335 sensors, the IMU board enables students and hobbyists to easily incorporate roll, pitch, and tilt measurements into their projects or robots.</p>


<p>


	Board comes fully assembled and tested. Units come as shown without headers installed. We recommend right-angle break away headers, straight pin headers, or wire up your own cable!</p>


<p>


	Having a hard time picking an IMU? Our <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=167" target="_self">Accelerometer, Gyro, and IMU Buying Guide</a> might help!</p>


<p>


	<b>Dimensions:</b> 0.75x0.9&quot; (20x23mm)</p>


<p>


	<b>Weight:</b> 2g</p>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/IMU/5DOF-v25.pdf" name="" target="_blank">IMU 5DOF Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/adxl335.pdf" name="" target="_blank">ADXL335 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SMD/Datasheet_IDG500.pdf" name="" target="_blank">IDG500 Datasheet</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Sensors/IMU-5DOF-Dimensional.pdf" target="_blank">IMU 5DOF Dimensional Drawing</a></li>


</ul>


<p>


	Resources and Applications (Inverted / reverse pendulum robots, Unmanned Aerial Vehicles, etc.):</p>


<ul>


	<li>


		<a classname="" href="http://sites.google.com/site/pic24micro/Home/projects/vibration-compenstated-tilt-sensor" name="" target="_blank">Great stabilization project using mini-Bully PIC</a></li>


	<li>


		<a href="http://www.dprg.org/projects/2003-01a/" target="_blank">Reverse Pendulum Robot Project</a></li>


	<li>


		<a href="http://sourceforge.net/mailarchive/forum.php?forum_id=296&amp;max_rows=25&amp;style=nested&amp;viewmonth=200309" target="_blank"> The ADXRS vs. the Tokin CG-16D</a></li>


	<li>


		<a href="http://autopilot.sourceforge.net/rev2.2.html" target="_blank"> Helicopter Autopilot</a></li>


	<li>


		<a href="http://www.joustinghill.org/matt/robots/firemarshalbill/" target="_blank"> Fire Marshall Bill Robot</a></li>


	<li>


		<a href="http://wiring.org.co/learning/basics/gyroidg500.html" target="_blank">Wiring Example</a> (IDG500)</li>


</ul>


moduleID: ThermalPrinter
family: printer
fritzingversion: 0.6.4b.10.28.5569
author: SparkFun
title: Thermal Printer
date: 2011-11-09
path: core/thermalprinter.fzp
description:
<p>

	<strong>Description:</strong> This is a thermal printer like you would find on a cash register or adding machine. It will print simple strings passed to it via TTL serial, bitmap images (poorly) and it even generates several different formats of barcodes!</p>

<p>

	The thermal printer takes 2.25&quot; (57mm) wide thermal paper with a max roll diameter of 1.5&quot; (39mm). Thermal paper is inexpensive and commonly found in most office supply stores in 85ft lengths. You may have to remove some paper from these rolls in order for it to fit into the printer. But, you can always use the excess paper in the printer, since you don&#39;t need to have a &#39;core&#39; in the paper for it to work.</p>

<p>

	The back panel has 2 3-pin connectors; one for power and one for serial communications. The thermal printer ships with default 19200bps baud rate. If you&#39;re using this printer in conjunction with an Arduino, you&#39;re going to need to connect it to the &quot;Vin&quot; pin and attach an external power supply, as the printer will draw more current than USB is capable of delivering. We&#39;ve found that a 5V wall adapter works best (see related products below).</p>

<p>

	The print head has a rated life of 50km! That means this printer can handle a marathon&#39;s distance (~30 miles) of printing before the head hits its rated limit.</p>

<p>

	Use this printer in any project where you need a hard-copy of the output, or in an art project where you want to keep the output to stick on your fridge, or to build a DIY cash register for your lemonade stand!</p>

<p>

	<strong>Documents:</strong></p>

<ul>

	<li>

		<a href="http://www.sparkfun.com/datasheets/Components/General/cashino%20thermal%20printer%20a2.pdf" target="_blank">Product Sheet</a></li>

	<li>

		<a href="http://www.sparkfun.com/datasheets/Components/General/A2-user%20manual-1.pdf" target="_blank">User Manual</a></li>

	<li>

		<a href="http://www.sparkfun.com/datasheets/Components/General/Driver%20board.pdf" target="_blank">Command Set</a></li>

	<li>

		<a href="http://www.sparkfun.com/datasheets/Components/General/ThermalPrinter_Example.zip">Example Code</a></li>

	<li>

		<a href="http://tronixstuff.wordpress.com/2011/07/08/tutorial-arduino-and-a-thermal-printer//" target="_blank">Tronixstuff Tutorial</a></li>

	<li>

		<a href="http://bildr.org/2011/08/thermal-printer-arduino/" target="_blank">Bildr Tutorial</a></li>

</ul>


moduleID: 1e03b5a1-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 14 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.14pins
path: obsolete/mystery_part14.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 14 pins on a 100 mil inline pin header footprint.


moduleID: Arduino Voice Shield-v16
family: voice shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Voicebox Shield (Stephen Hawking in a box)
date: 2011-07-08
path: core/Arduino Voice Shield-v16.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The VoiceBox Shield can be mounted on top of your <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=666" name="" target="_self">Arduino USB Board</a> or <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_self">Pro</a>, to give it access to all capabilities of the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9578" name="" target="_self">SpeakJet</a> voice and sound synthesizer. <span class="description">The Voice Box Shield uses the SpeakJet chip to convert serial commands into a great robot-sounding voice.</span><br />


	<br />


	Populated on the VoiceBox Shield are the 18-DIP SpeakJet IC and a two stage audio amplifier with a potentiometer to set the gain. You can connect a speaker directly to the &#39;SPK+/-&#39; pins, and get your Arduino-bot talking with very minimal work!<br />


	<br />


	You can control the SpeakJet through either its serial line, or the eight event input lines which are connected to digital pins 5-12. A 3-way jumper allows you to connect either the software (D2) or hardware (D1) TX pin of the Arduino to the SpeakJet&#39;s serial input.<br />


	<br />


	Also included on the shield are a 13x7 grid of 0.1&quot; pitch through-holes for prototyping, the Arduino&#39;s reset button. Headers are not included, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Arduino%20Voice%20Shield-v13.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/SpeakJet_Sample.zip" name="" target="_blank">Example Code</a></li>


	<li>


		<a classname="" href="http://www.youtube.com/watch?v=Eo3hEKAOxeg" name="" target="_blank">Listen to the SpeakJet!</a> (YouTube)</li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=158" name="" target="_blank">Talking Wireless Server Tutorial</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/General/speakjet-usermanual.pdf" name="" target="_blank">SpeakJet User&#39;s Guide</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/General/SpeakJet-dictionary.zip" name="" target="_blank">SpeakJet Dictionary</a></li>


	<li>


		<a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=166" target="_blank">Tutorial </a>on adding the TTS256 text to speech IC to the shield</li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9624" target="_self">DEV-09624</a></p>


moduleID: 7e3598758afd7c1363215b7f0c124af8
fritzingversion: 0.7.0b.02.01.5801
author: red byer
title: Digital Panel Meter, Voltage, DMS-20PC
label: Digital Panel Meter, Voltage, DMS-20PC by Murata
date: 2012-03-18
path: contrib/Digital_Panel_Meter__Voltage__DMS_20PC.fzp
description:
Digital panel meter by Murata. DMS-20PC class.  Can be used for displaying a voltage measurement.   Extremely simple to set up and use, extremely accurate.   With voltage scaling, can be used in a wide variety of applications.  Different color LEDs can be used (blue is shown).  Available on Digikey.
DMS-20PC Series, 31⁄2 Digit, LED Display, Digital Panel Voltmeters combine a preci- sion A/D converter; a factory-trimmed, highly stable, voltage reference; and a large (0.37"/9.4mm), easy-to-read LED display in a single package that is only slightly larger than the display itself. Displays are offered in either red, orange, amber, yellow, green or blue colors. High-intensity and low-power (35mW total) red LEDs are also optional.
These low-cost meters are fully self-contained and fully functional. Their subminiature (1.38" x 0.88" x 0.48"), epoxy-encapsulated cases incorporate built-in color filters and bezels; are moisture and vibration proof; and function well in the harshest environments. Their 12-pin, dual-in-line configuration offers component-like, plug-in convenience and maximum versatility. Operating temperature range is 0 to +60°C.
The meters come with one of four, differential, input voltage ranges: ±200mV, ±2V ±20V or ±200V. Input impedance is a minimum 800kΩ. CMRR is typically 86dB (dc to 60Hz), and CMV is ±2V. Input overvoltage protection (on the non-inverting input) is ±250V. Devices are fully calibrated at the factory to an accuracy of ±1 count (±0.05% of full scale range) and never require calibration or adjustment.
A DISPLAY ENABLE function permits the display to be disabled for "power-down" operation. All models have a DISPLAY TEST function. Standard red LED models offer an optional DISPLAY HOLD function.
Small size, low cost and adjustment-free reliability make the DMS-20PC Series the best choice for all your 31⁄2 digit, LED, DPM applications.


moduleID: 3661e4bbb7d863e04ccf7a9994dc65ff
family: microcontroller board (arduino)
version: 4
fritzingversion: 0.4.0b.06.21.4282
author: André Knörig
title: Arduino Fio
label: Arduino
date: 2010-07-01
path: core/Arduino Fio.fzp
description:
The Arduino Fio is a microcontroller board based on the ATmega328P runs at 3.3V and 8 MHz. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board.
The Arduino Fio is intended for wireless applications. The user can upload sketches with an a FTDI cable or Sparkfun breakout board. Additionally, by using a modified USB-to-XBee adaptor such as XBee Explorer USB, the user can upload sketches wirelessly. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires.
The Arduino Fio was designed by Shigeru Kobayashi and SparkFun Electronics, and manufactured by SparkFunElectronics.

http://arduino.cc/en/Main/ArduinoBoardFio


moduleID: LilyPad-Simple-v22
family: arduino
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Arduino Simple Board
date: 2011-07-08
path: core/LilyPad-Simple-v22.fzp
description:
<p>


	<strong>Description:</strong> This is the LilyPad Arduino Simple Board. It&#39;s controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9266" name="" target="">LilyPad Arduino Main Board</a>, a built in power supply socket, and an on/off switch. Any of our LiPo batteries can be plugged right into the socket. The Simple board is designed to streamline your next sewable project by keeping things simple and giving you more room to work&nbsp; and eliminating the need to sew a power supply. This revision does away with the ISP header and adds a charging circuit based on the MCP73831 IC.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	Can&#39;t decide which Arduino is right for you? <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=148" name="" target="">Arduino buying guide</a>!<br />


	<br />


	<strong>Dimensions:</strong></p>


<ul>


	<li>


		50mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Simple-v22.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Simple-v22.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/MCP73831T.pdf" target="_blank">Datasheet</a> (MCP73831T)</li>


	<li>


		<a classname="" href="http://web.media.mit.edu/%7Eleah/LilyPad/" name="" target="_blank">Leah Buechley&#39;s LilyPad Tutorial</a></li>


	<li>


		<a href="http://www.arduino.cc/en/Main/ArduinoBoardLilyPad" target="_blank">LilyPad Arduino Documentation</a></li>


</ul>


<p>


	<strong>Replaces: </strong><a 9725="" href="http://&lt;a href=" http:="" products="" www.sparkfun.com="">DEV-09725</a></p>


moduleID: xbeeshield-v13
family: wireless shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino XBee Shield
date: 2011-07-08
path: core/xbeeshield-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This new revision fixes some minor spacing and labeling issues, but functionality remains the same.The XBee Shield simplifies the task of interfacing an XBee with your Arduino. This board mates directly with an <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9219" name="" target="_blank">Arduino Pro</a> or <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9950" target="_self">USB board</a>, and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. This is SparkFun&#39;s own design and is a distant relative to the official XBee Shield from Arduino.<br />


	<br />


	The serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level shifting on the DIN pin of the XBee.<br />


	<br />


	The board also includes LEDs to indicate power and activity on DIN, DOUT, RSSI, and DIO5 pins of the XBee. The Arduino&#39;s reset button is brought out on the shield, and a 12x11 grid of 0.1&quot; holes are available for prototyping. The shield does not come with headers installed; we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>. The XBee module is also not included.<br />


	<br />


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Mounts directly onto your Arduino</li>


	<li>


		DIN and DOUT pins of XBee can be connected to either the UART pins or any digital pin on the Arduino (D2 and D3 default)</li>


	<li>


		3.3V power regulation and level shifting on-board</li>


	<li>


		12x11 grid of 0.1&quot; spaced prototyping holes</li>


	<li>


		Reset button brought out</li>


	<li>


		Power, DIN, DOUT, RSSI and DIO5 indicator LEDs</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/xbeeshield-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/xbeeshield-v13.zip" target="_blank">Eagle Files</a></li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/9841">WRL-09841</a></p>


moduleID: TMP102_Breakout-v11
family: temperature breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Digital Temperature Sensor Breakout - TMP102
date: 2011-07-08
path: core/TMP102_Breakout-v11.fzp
description:
<p>


	<b>Description: </b>This is a breakout board for the incredibly small TMP102 digital temperature sensor. The TMP102 is a digital sensor (I2C a.k.a. TWI), has a resolution of 0.0625&deg;C, and is accurate up to 0.5&deg;C. The sensor requires very low-current, and is loaded with features.</p>


<p>


	Communication with the TMP102 is achieved through a two-wire serial interface. There is no on-board voltage regulator, so supplied voltage should be between 1.4 to 3.6VDC. Filtering capacitors and pull-up resistors are included as shown.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		12-bit, 0.0625&deg;C resolution</li>


	<li>


		Accuracy: 0.5&deg;C (-25&deg;C to +85&deg;C)</li>


	<li>


		Low quiescent current


		<ul>


			<li>


				10&micro;A Active (max)</li>


			<li>


				1&micro;A Shutdown (max)</li>


		</ul>


	</li>


	<li>


		1.4V to 3.6VDC supply range</li>


	<li>


		Two-wire serial interface</li>


</ul>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Temperature/TMP102_Breakout-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Temperature/tmp102.pdf" name="" target="_blank">TMP102 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Temperature/tmp102.zip" name="" target="_blank">Example Code</a> (ATmega328)</li>


	<li>


		<a href="http://wiring.org.co/learning/libraries/tmp102sparkfun.html" target="_blank">Wiring Example</a></li>


	<li>


		<a href="http://mbed.org/cookbook/TMP102-Temperature-Sensor" target="_blank">mbed Example</a></li>


	<li>


		<a href="http://bildr.org/2011/01/tmp102-arduino/" target="_blank">bildr blog - TMP102</a></li>


</ul>


moduleID: 1e03b5a2-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 16 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.16pins
path: obsolete/mystery_part16.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 16 pins on a 100 mil inline pin header footprint.


moduleID: Breadboard Power Supply - SMD v12
family: power conditioning
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Breadboard Power Supply Board SMD
date: 2011-11-16
path: core/Breadboard Power Supply - SMD v13.fzp
description:
<p>


	<b>Description: </b>This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1&quot; pitch for simple insertion into a breadboard.</p>


<p>


	Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is supplied to the pins labeled GND and VCC. Board has both an On/Off switch and a voltage select switch (3.3V/5V).&nbsp;</p>


<p>


	The two pairs of GND and VCC pins are spaced such that when connected to our <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=112" name="" target="">Basic Breadboard</a> both power busses will be powered.</p>


<p>


	Check out our <a href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=103" target="_blank">Unregulated Power Supply Tutorial</a>!</p>


<p>


	<b>Dimensions:</b> 2.15x0.65&quot;</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		6-12V input voltage via barrel jack or 2-pin header</li>


	<li>


		3.3V or 5V regulated output voltage</li>


	<li>


		ON/OFF switch</li>


	<li>


		Output voltage select switch</li>


	<li>


		Power status LED</li>


	<li>


		PTC fuse protected power</li>


	<li>


		5.5x2.1mm center positive barrel jack</li>


</ul>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/Breadboard Power Supply - SMD v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/Breadboard Power Supply - SMD v13.zip" target="_blank">Eagle Files</a></li>


</ul>


<p>


	<strong>Replaces: </strong><a href="http://www.sparkfun.com/products/9319" target="_blank">PRT-09319</a></p>




moduleID: LilyPad-Temp-v12
family: temperature breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Temperature Sensor
date: 2011-07-08
path: core/LilyPad-Temp-v12.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical touch based on body heat and ambient conditions with this small sensor.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		20mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="/datasheets/DevTools/LilyPad/LilyPad-TempSensor.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="/datasheets/DevTools/LilyPad/MCP9700.pdf" target="_blank">MCP9700 Datasheet</a></li>


	<li>


		LilyPad Temp. Sensor Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-TemperatureSensor-08777.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


moduleID: 1e03b59a-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 20 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.20pins
path: obsolete/mystery_part20.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 20 pins on a 100 mil inline pin header footprint.


moduleID: 1e03b5a3-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 1 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.1pins
path: obsolete/mystery_part1.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 1 pins on a 100 mil inline pin header footprint.


moduleID: d30f97b6fbe1asdad59ea7f0d636a7a
family: microcontroller (propeller)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: Parallax Propeller D40
label: Propeller
date: 2010-04-08
path: core/controller_propeller_D40.fzp
description:
The Propeller chip makes it easy to rapidly develop embedded applications. Its eight processors (cogs) can operate simultaneously, either independently or cooperatively, sharing common resources through a central hub. The developer has full control over how and when each cog is employed; there is no compiler-driven or operating system-driven splitting of tasks among multiple cogs. A shared system clock keeps each cog on the same time reference, allowing for true deterministic timing and synchronization. Two programming languages are available: the easy-to-learn high-level Spin, and Propeller Assembly which can execute at up to 160 MIPS (20 MIPS per cog).


moduleID: MP3 Shield-v13
family: music shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino MP3 Player Shield
date: 2011-07-08
path: core/MP3 Shield-v13.fzp
description:
<p>


	<strong>Description: </strong>This new revision of the MP3 player shield retains the awesome MP3 decoding abilities of the last version but adds the storage functionality of the SD card shield. Now you can pull MP3 files from an SD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone&nbsp; MP3 player! The MP3 Shield still utilizes the <a href="http://www.sparkfun.com/products/8892">VS1053B</a> MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.</p>


<p>


	The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1&quot; pitch header.</p>


<p>


	This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3 Shield-v13.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3 Shield-v13.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/SMD/vs1053.pdf" target="_blank">Datasheet</a> (VS1053B)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3_Player_Example.pde" target="_blank">MP3 Player Example Code</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3_Player_Files.zip" target="_blank">Sample MP3 Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3_Player_Example_Control.pde" target="_blank">MP3 Player Control Example</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/MP3_Shield_Example.zip" target="_blank">MP3 Decoding Example Sketch</a></li>


</ul>


moduleID: 1e03b59b-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 10 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.10pins
path: obsolete/mystery_part10.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 10 pins on a 100 mil inline pin header footprint.


moduleID: a4f38a10-dd92-11dd-a3e2-001f5b3a17a4
family: ic
version: 4
fritzingversion: 0.3.6b.08.14.3340
author: Dirk van Oosterbosch
title: H-Bridge
label: IC
date: 2009-01-08
path: core/h-bridge.fzp
description:
Quadruple Half H-Bridge Motor Driver. Drive two motors with 1.1A with this chip. (SN754410 data sheet from TI here http://focus.ti.com/lit/ds/symlink/sn754410.pdf )


moduleID: 1e03b5a4-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 6 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.6pins
path: obsolete/mystery_part6.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 6 pins on a 100 mil inline pin header footprint.


moduleID: cellular shield-v12
family: cellular shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Cellular Shield
date: 2011-07-08
path: core/cellular shield-v12.fzp
description:
<p>


	<strong>D</strong><span style="font-weight: bold;">escription: </span>The Cellular Shield for Arduino includes all the parts needed to interface your Arduino with an <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9533" name="" target="_self">SM5100B</a> cellular module. This allows you to easily add SMS, GSM/GPRS, and TCP/IP functionalities to your Arduino-based project. All you need to add cellular functionality to your Arduino project is a SIM card (pre-paid or straight from your phone) and an antenna and you can start sending Serial.print statements to make calls, send texts and serve web pages!</p>


<p>


	&nbsp;The main components of the Cellular Shield are a 60-pin <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9535" name="" target="_self">SM5100B connector</a>, a <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=548" name="" target="_self">SIM card socket</a>, and an SPX29302 voltage regulator configured to regulate the Arduino&#39;s raw voltage to 3.8V. The board&#39;s red LED indicates power. The Arduino&#39;s reset button is also brought out on the shield.<br />


	<br />


	Two solder jumpers on the board allow you to select which serial pins interface with the cellular module - software (D2, D3) or hardware (D0, D1). There is also a 5-pin, 0.1&quot; spaced header with connections for microphone inputs and speaker outputs. Headers are not soldered on, we recommend the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" name="" target="_self">6</a> and <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" name="" target="_self">8-pin stackable headers</a>.<br />


	<br />


	The SM5100B cellular module <span style="font-style: italic;">is</span> included with this product, however an antenna is not. It is pre-configured to 9600bps.<br />


	<br />


	<span style="font-weight: bold;"><span style="font-weight: bold;">Documents:</span></span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/cellular%20shield-v12.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/Code/Cellular_Shield_Passthrough.zip" name="" target="_blank">Sample Sketch</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/CellularShield/SM5100B%20Datasheet.pdf" name="" target="_blank">SM5100B Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/CellularShield/SM5100B%20AT%20Command%20Set.pdf" name="" target="_blank">SM5100B AT Command Set</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/CellularShield/SM5100B%20SMS%20App%20Note.pdf" name="" target="_blank">SM5100B SMS App Note</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/CellularShield/SM5100B%20TCPIP%20App%20Note.pdf" name="" target="">SM5100B TCP/IP App Note</a></li>


	<li>


		<a href="http://tronixstuff.wordpress.com/2011/01/19/tutorial-arduino-and-gsm-cellular-part-one/" target="_blank">Arduino Tutorial</a></li>


</ul>


moduleID: 1e03b59c-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 11 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.11pins
path: obsolete/mystery_part11.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 11 pins on a 100 mil inline pin header footprint.


moduleID: Modkit Shield-v1a
family: motor shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Modkit Shield
date: 2011-07-08
path: core/Modkit Shield-v1a.fzp
description:
<p>


	<strong>Description:</strong> The Modkit MotoProto Shield for Arduino that makes it easy to connect up to 4 sensors and control two DC motors as well as a 16X2 character LCD. The sensor jacks accept 2.5mm cables and provide access to VCC, GND, and an analog input.</p>


<p>


	Sensors can be soldered to a 2.5mm cable and you can begin plug-and-play prototyping with a wide assortment of our sensors including line sensors, ultrasonic distance sensors, light sensors, photo interrupter, etc. There is also a large programmable button and a space for an i2c header to connect more advanced sensors such as an accelerometer.</p>


<p>


	The motor driver circuit is based on the L298 H-bridge and can drive up to 2 amps per channel. The board takes its power from the same Vin line as the Arduino board, includes blue and yellow LEDs to indicate active direction, and all driver lines are diode protected from back EMF.</p>


<p>


	<a href="http://modk.it" target="_blank">Modkit</a> develops a drag-and-drop graphical programming environment inspired by <a href="http://scratch.mit.edu" target="_blank">Scratch</a> for <a href="http://arduino.cc" target="_blank">Arduino</a> and Arduino compatible boards, making it easier than ever to program your physical project. The Modkit MotoProto Shield is well suited for general projects, prototyping, and educational robotics.<br />


	<br />


	For a limited time, purchase a Modkit MotoProto Shield and receive a free invite to try Modkit&#39;s programming environment before it is released to the public. The shield can also be programmed with the Arduino development environment.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Modkit%20Shield-v1a.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Modkit Shield-v1a.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MotoProto_LCD.zip" target="_blank">Example Code</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/General/L298N.pdf" target="_blank">Datasheet</a> (L298)</li>


	<li>


		<a href="http://www.modk.it/software" target="_blank">Modkit Software</a></li>


</ul>


moduleID: L3G4200D-Breakout-v10
family: gyroscope breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Tri-Axis Gyro Breakout - L3G4200D
date: 2011-11-29
path: core/L3G4200D-Breakout-v10.fzp
description:
<p>


	<strong>Description:</strong> This is a breakout board for the L3G4200D low-power three-axis angular rate sensor. The L3G4200D has a full scale of &plusmn;250/&plusmn;500/&plusmn;2000 dps and is capable of measuring rates with a user-selectable bandwidth. These work great in gaming and virtual reality input devices, GPS navigation systems and robotics.</p>


<p>


	<strong>Features:</strong></p>


<ul>


	<li>


		Three selectable full scales (250/500/2000 dps)</li>


	<li>


		I2C/SPI digital output interface</li>


	<li>


		16 bit-rate value data output</li>


	<li>


		8-bit temperature data output</li>


	<li>


		Wide supply voltage: 2.4 V to 3.6 V</li>


	<li>


		Low voltage-compatible IOs (1.8 V)</li>


	<li>


		Embedded power-down and sleep mode</li>


	<li>


		Embedded temperature sensor</li>


	<li>


		High shock survivability</li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Gyros/3-Axis/L3G4200D-Breakout-v10.pdf">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Gyros/3-Axis/L3G4200D-Breakout-v10.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Gyros/3-Axis/17116.pdf" target="_blank">Datasheet</a> (L3G4200D)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/Gyros/3-Axis/L3G4200D_Example.zip" target="_blank">Example Code</a></li>


	<li>


		<a href="http://bildr.org/2011/06/l3g4200d-arduino/" target="_blank">Bildr Tutorial</a></li>


</ul>


moduleID: Memoire-1.0
family: snootlab shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Snootlab
title: Memoire 1.0 - SD card log shield
date: 2011-11-28
path: core/Memoire-1.0.fzp
description:
	<div id="idTab1" class="rte"><p>SD log shield with RTC and a square pads prototyping area for Arduino</p>



<p>&nbsp;</p>



<p><strong>SD Card support</strong></p>



<ul>



<li>Allows backup of a large amount of data on SD card and PC retrieval</li>



<li>Support SdFat library for SD FAT16/FAT32 SC/HC cards</li>



<li>3V3 regulator on the shield</li>



</ul>



<p>&nbsp;</p>



<p><strong>Real Time Clock</strong></p>



<ul>



<li>Adding date and time data based on the component I2C DS1307</li>



<li>Support the standard library DS1307</li>



<li>Date accessed using the format year / month / day of week / hour / minute / seconds</li>



<li>Time adjustable 12h with info AM / PM or 24H</li>



<li>Backup Time on lithium battery (lasting 10 years if 48mAh)</li>



<li>Corrections leap years, months with less than 31 days</li>



<li>SQW output signal (square wave) Programmable 1Hz (for pulse every second, or 4kHz or 8kHz or 32kHz)</li>



<li>Clock not subject to bug date before 100 years</li>



</ul>



<p>&nbsp;</p>



<p><strong>And more ...</strong></p>



<ul>



<li>Square pads prototyping area&nbsp;to add sensors, actuators, RF, ...</li>



<li>5V and GND lines available on the sides of the prototyping area</li>



<li>Arduino reset button on top</li>



<li>LED display available on pin D9</li>



<li>Simple modification provided for adapting the shield to an Arduino Mega</li>



</ul>



<p>&nbsp;</p>



<p>Compatible with Arduino Uno, Uno CMS and Duemilanove</p>



<p>Compatible with Arduino Mega with a simple modification</p>



<p>&nbsp;</p>



<p><img style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px; border: 0px initial initial;" title="Guide de montage" src="https://shop.snootlab.com/img/p/86-324.jpg" alt="Guide de montage" width="168" height="79" /></p>



<p>Documentation and installation guide : on going</p>



<p>&nbsp;</p>



<p>The official support forum: <a href="http://forum.snootlab.com" target="_blank">forum.snootlab.com</a></p>



<p>&nbsp;</p></div>



					<ul id="idTab9">



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=26">Assembly guide M&eacute;moire FR.pdf</a><br />Assembly guide of M&eacute;moire shield FR</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=28">Topside M&eacute;moire.pdf</a><br />Topside M&eacute;moire</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=29">Schema M&eacute;moire.pdf</a><br />Schema M&eacute;moire</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=30">Eagle M&eacute;moire.zip</a><br />Eagle files of M&eacute;moire</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=42">Manual M&eacute;moire EN.pdf</a><br />Assembly guide of M&eacute;moire shield EN</li>



				</ul>





<p>&nbsp;</p>





moduleID: generic_sip_2_300mil
family: generic ic
version: 4
author: Fritzing Part-o-matic
title: SIP - 2 pins
label: U
date: 2009-10-20
taxonomy: part.sip.2pins
path: core/generic_sip_2_300mil.fzp
description:
A SIP stand-in part for whatever you want.  With 2 pins on a 300 mil single inline package (SIP) footprint.


moduleID: M5450_LED_Driver
family: ic
version: 4
fritzingversion: 0.7.0b.02.01.5801
author: Christopher Mann
title: M5450 LED Driver
label: M5450
date: 2012-03-04
path: core/M5450_LED_Driver.fzp
description:
The M5450 is a monolithic MOS integrated circuit produced with an N-channel silicon gate technology.  A single pin controls the LED display brightness by setting a reference current through a variable resistor connected to Vdd or to a separate supply of 13.2V maximum.


moduleID: 1e03b59d-ed62-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 8 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.8pins
path: obsolete/mystery_part8.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 8 pins on a 100 mil inline pin header footprint.


moduleID: MIDI_Shield-v13
family: music shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Midi Shield
date: 2011-07-08
path: core/MIDI_Shield-v13.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The MIDI Shield board gives your Arduino access to the powerful <a classname="" href="http://en.wikipedia.org/wiki/Musical_Instrument_Digital_Interface" name="" target="_blank">MIDI communication protocol</a>, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI&#39;s event messages.<br />


	<br />


	The MIDI Shield provides an opto-isolated MIDI-IN port as well as a MIDI-OUT port. The MIDI Shield can be mounted directly on top of an Arduino, connecting the MIDI-IN to the Arduino&#39;s hardware RX pin and the MIDI-OUT to TX. Potentiometers are connected to analog pins 1 and 2, and can be used to control volume, pitch, tone or anything else you&#39;d like. Also connected on the shield are three momentary push buttons (connected to D2-4), a reset button, and green and red stat LEDs. The RUN/PROG switch allows you to program the Arduino over serial without having to remove the shield.<br />


	<br />


	<strong>Note:</strong> The MIDI Shield does not come with the through-hole MIDI connectors or trimpots soldered on. All of these components (2 MIDI connectors and 2 trimpots) are included with the product, however.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MIDI_Shield-v13.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/Arduino/Midi_Shield.zip" name="" target="_blank">Example Arduino Sketch</a></li>


	<li>


		<a classname="" href="http://arduino.cc/en/Tutorial/Midi" name="" target="_blank">Arduino MIDI Tutorial</a></li>


</ul>


moduleID: LilyPad Battery-Connect-v11
family: power connector
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Lilypad Battery Connect
date: 2011-07-08
path: core/LilyPad Battery-Connect-v11.fzp
description:
<p>


	<strong>Description:</strong> The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad system. It consists of a single 2-pin JST connector on a small LilyPad board with positive and negative terminals.</p>


<p>


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!</p>


<p>


	LilyPad Battery Connect is a design concepted by Felicia Williams of Boulder, Colorado.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad%20Battery-Connect-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad Battery-Connect-v11.zip" target="_blank">Eagle Files</a></li>


</ul>


moduleID: f0d627984e1614e5c1c797471f529619
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2pe
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2pe.fzp
description:
The BASIC Stamp 2pe serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: 10x2-Epaper-Breakout-Board-v11
family: e-paper
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: E-Paper Eval Board
date: 2011-07-08
path: core/10x2-Epaper-Breakout-Board-v11.fzp
description:
<p>


	<strong>Description:</strong> E-paper displays are rad. But those 26-pin SMD connectors can be a real pain to solder, so we put together a breakout board to help you integrate this very cool technology into your next project. This board breaks out all of the major pins from the e-paper ribbon connector to a 0.1&quot; pitch header. Because the e-paper display requires a 35V supply, the breakout also includes a voltage step-up so that you can power the display using either 3.3V or 5V.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/10x2-Epaper-Breakout-Board-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/BreakoutBoards/10x2-Epaper-Breakout-Board-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/LCD/Monochrome/WATN001002BFW00000000.pdf">Datasheet</a> (E-paper display)</li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Connectors/08630.pdf">Datasheet</a> (SMD Connector)</li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/LCD/Monochrome/ePaperDriver.zip" target="_blank">Example Code</a></li>


	<li>


		<a href="http://bildr.org/2011/06/epaper-arduino/" target="_blank">bildr Tutorial</a></li>


</ul>


moduleID: c4256c251d53ee723058f86aa6d016a2
family: microcontroller board (gogoboard)
fritzingversion: 0.4.0b.06.21.4282
author: Lionel Michel
title: GogoBoard 4.0
label: GogoBoard 4.0
date: 2010-06-23
path: core/gogoboard 4.0.fzp
description:
The GoGo board framework is a collection of open-source hardware platforms mainly aimed for educational projects.


moduleID: Arduino-Pro-Mini-v11
family: arduino
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Pro Mini 3.3V
date: 2011-07-08
path: core/Arduino-Pro-Mini-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> It&#39;s blue! It&#39;s thin (0.8mm)! It&#39;s the Arduino Pro Mini! SparkFun&#39;s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader (select &#39;Arduino Duemilanove w/ 328&#39; within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It&#39;s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.</p>


<p>


	We really wanted to minimize the cost of an Arduino. The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.</p>


<p>


	Can&#39;t decide which Arduino is right for you? <a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=148" name="" target="">Arduino buying guide</a>!</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		ATmega328 running at 8MHz with external resonator (0.5% tolerance)</li>


	<li>


		Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)</li>


	<li>


		USB connection off board</li>


	<li>


		Supports auto-reset</li>


	<li>


		3.3V regulator</li>


	<li>


		Max 150mA output</li>


	<li>


		Over current protected</li>


	<li>


		Reverse polarity protected</li>


	<li>


		DC input 3.3V up to 12V</li>


	<li>


		On board Power and Status LEDs</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		0.7x1.3&quot; (18x33mm)</li>


	<li>


		Less than 2 grams</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents: </span></p>


<ul>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Boards/Arduino-Pro-Mini-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Boards/Arduino-Pro-Mini-v12.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.arduino.cc/en/Main/ArduinoBoardProMini" name="" target="_blank">Arduino Pro Mini Homepage</a></li>


	<li>


		<a classname="" href="http://www.arduino.cc/en/Guide/ArduinoProMini" name="" target="_blank">Getting Started Tutorial</a></li>


</ul>


moduleID: canbus_shield-v12
family: can shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Can-Bus Shield
date: 2011-07-08
path: core/canbus_shield-v12.fzp
description:
<div>


	<strong>Description:</strong> This shield gives the Arduino CAN-Bus capability. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with&nbsp;OBDII cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an&nbsp;EM406 GPS module. Making this shield ideal for data logging application.</div>


<div>


	<strong>Features</strong></div>


<div>


	<ul>


		<li>


			CAN v2.0B upto 1 Mb/s</li>


		<li>


			High speed SPI Interface (10 MHz)</li>


		<li>


			Standard and extened data and remote frames</li>


		<li>


			CAN connection via standard 9-way sub-D connector</li>


		<li>


			9-way sub-D standard&nbsp;OBDII connection cable</li>


		<li>


			Power can supply to Arduino by sub-D via resettable fuse and reverse polarity protection.</li>


		<li>


			Socket for&nbsp;EM406 GPS module</li>


		<li>


			Micro SD card holder</li>


		<li>


			Connector for&nbsp;serial LCD</li>


		<li>


			Reset button</li>


		<li>


			Joystick control menu navigation control</li>


		<li>


			Two LED indicator</li>


	</ul>


	<p>


		<strong>Documents:</strong></p>


	<ul>


		<li>


			<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/canbus_shield-v12.pdf" target="_blank">Schematic</a></li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/canbus_shield-v12.zip" target="_blank">Eagle Files</a></li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2515.pdf" target="_blank">Datasheet </a>(MCP2515)</li>


		<li>


			<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2551.pdf" target="_blank">Datasheet </a>(MCP2551)</li>


	</ul>


</div>


moduleID: Lilypad_PowerSupply-v16
family: power conditioning
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Power Supply
date: 2011-07-08
path: core/Lilypad_PowerSupply-v16.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 100mA. Short circuit protected.<br />


	<br />


	This board has AAA battery clips but can use an input from 1.2V to 5V. Our lithium polymer batteries are a good, rechargable alternative.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable - but be sure to remove the battery!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		56x26mm</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-PowerSupply.pdf" target="_blank">Schematic</a></li>


	<li>


		LilyPad Power Supply Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-PowerSupply-08466.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


moduleID: LilyPad-slide-switch13
family: switch
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Slide Switch
date: 2011-07-08
path: core/LilyPad-slide-switch13.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		7.75x18.1mm</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-slide-switch11.pdf" name="" target="_blank">Schematic</a></li>


</ul>


moduleID: 3a761a44-f1ff-11dd-b332-001a4d5c439f
family: obsolete mystery part
version: 1
author: Fritzing Part-o-matic
title: Mystery Part - 2 pins
label: U
date: 2009-10-01
taxonomy: part.mystery.magical.2pins
path: obsolete/mystery_part2.fzp
description:
A dummy, proxy, ersatz, stand-in part for whatever you want.  With 2 pins on a 100 mil inline pin header footprint.


moduleID: Touch_Shield-v11
family: touch shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Cap Sense Shield
date: 2011-07-08
path: core/Touch_Shield-v11.fzp
description:
<p>


	<strong>Description:</strong> The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it&#39;s even easier to incorporate into your Arduino projects with the touch shield. The touch shield has 9 capacitive touch pads, with headers for the remaining 3 electrode connections. With this shield you can have a total of 12 touch sensitive buttons. An on-board logic level converter allows it to work with 5V and 3.3V Arduino boards. Simply solder on some header pins and stack it on to your Arduino for a convenient input device. Check below for some example code to get you started.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Touch_Shield-v11.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Touch_Shield-v11.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Dev/Arduino/Shields/Touch_Shield_Example.zip" target="_blank">Example Code</a></li>


</ul>


moduleID: 6DOF-Digital-v10
family: imu
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Andre Knoerig
title: IMU Digital Combo Board 6DOF
date: 2012-01-20
path: core/6DOF-Digital-v10.fzp
description:
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of freedom. The sensors communicate over I2C and one INT output pin from each sensor is broken out. If you need a simple and tiny board that gives you 6 degrees of freedom, this would be a good choice.


moduleID: Power Screwshield 1.0a
family: snootlab prototyping shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Snootlab
title: Power Screwshield - Easy screw terminals and SMD prototyping
date: 2011-11-28
path: core/Power Screwshield 1.0a.fzp
description:


<div id="idTab1" class="rte"><p>Easy screw terminals and SMD prototyping on Arduino.</p>



<p>&nbsp;</p>



<p>The plate is adapted to the dimensions of the Arduino Duemilanove Uno, it has a pads area allowing you to easily add additional components necessary to your circuits.</p>



<p>&nbsp;</p>



<p>The pads area can also receive a mini breadboard for initial testing of your prototypes. The pads are square to facilitate the achievement of solder bridges.</p>



<p>&nbsp;</p>



<p>The stackable connectors include all such signals from the arduino making them available for your prototypes. The signals are clearly indicated by the silkscreen on the top and bottom.</p>



<p>&nbsp;</p>



<p>A specific area allows you to solder a SMD component directly on the plate.</p>



<p>&nbsp;</p>



<p>A molex connector allows power supplies to your installation and your Arduino with a simple ATX PC power supply, your Arduino easily becomes autonomous.</p>



<p>&nbsp;</p>



<p>For advanced users, when the Arduino is powered by molex plug, a specific pads area receive 12V (if selected by solder bridge located on the shield). It allows you to controle 12V equipments, perfect to controle transistor fans, motors, lamps, LED ribbon, relays, ...</p>



<p>Finally, the status LED can be used (X) into your prototypes with a cutting track on the bottom (SJ2)</p>



<p>&nbsp;</p>



<p>The shield can be mounted on the Arduino Mega however, pins 14 (TX3) and A7 are difficult to use because partially covered by the shield.</p>



<p>Pins A8 to A15, Digital 22 to 53 and Com 15 to 21 (rear part of the Mega) are not included on the shield.</p>



<p>&nbsp;</p>



<p style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px;"><a style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #5d717e; list-style-type: none; list-style-position: initial; list-style-image: initial; background-image: none; background-attachment: initial; background-origin: initial; background-clip: initial; background-color: initial; text-decoration: none; outline-style: none; outline-width: initial; outline-color: initial; background-position: initial initial; background-repeat: initial initial; padding: 0px; margin: 0px;" title="Assembly guide" href="http://shop.snootlab.com/attachment.php?id_attachment=23" target="_blank"><img style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; outline-style: none; outline-width: initial; outline-color: initial; text-decoration: none; padding: 0px; margin: 0px; border: 0px none initial;" title="Guide de montage" src="https://shop.snootlab.com/img/p/55-288.jpg" alt="Guide de montage" width="169" height="80" /></a></p>



<p style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px;">Documentation and installation guide&nbsp;: <a title="Assembly guide" href="http://shop.snootlab.com/attachment.php?id_attachment=23" target="_blank">direct link</a></p>



<p>&nbsp;</p>



<p>The official support forum: forum.snootlab.com</p>



<p>&nbsp;</p>



<p style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px;"><img style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px; border: 0px initial initial;" src="http://shop.snootlab.com/themes/matrice/img/logos_ext/RoHS-Logo.jpg" alt="Logo RoHS" width="45" height="60" /></p></div>



					<ul id="idTab9">



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=18">Power ScrewShield diagram.pdf</a><br />Operating diagram of the Power ScrewShield</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=19">Power ScrewShield topside.pdf</a><br />Power ScrewShield implementation of  the components </li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=20">Eagle PowerScrewShield.zip</a><br />Eagle files of the Power ScrewSchield (schema and board)</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=22">Power ScrewShield guide FR.pdf</a><br />Power ScrewShield assembly guide FR</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=23">Power ScrewShield guide EN.pdf</a><br />Power ScrewShield Assembly guide EN</li>



				</ul>



moduleID: 17e42b0f30876b6ca457314cbd7e5847
family: color breakout
fritzingversion: 0.7.0b.02.01.5801
author: wreutz
title: Color Sensor Breakout ADJD-S311
date: 2012-02-21
path: core/Color_Sensor_Breakout_ADJD_S311.fzp
description:
<p><b>Description:</b></p>
      <p>The ADJD-S311-CR999 is a great little color light sensor. In fact, it's so little that it can be pretty difficult to play with, so we made this evaluation board! It provides all the necessary support circuitry to discern the smallest differences between visible colors.</p>

      <p><b>Dimensions:</b> 21.6x12.7mm (0.85x0.50")</p>

      <p><b>Documents:</b></p>
      <ul>
        <li>
          <a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/LightImaging/ADJD-S311_Breakout-v10.pdf" name="" target="_blank">Schematic</a>
        </li>
        <li>
          <a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/LightImaging/ADJD-S311_Breakout-v10.zip" name="" target="_blank">Eagle Files</a>
        </li>
        <li>
          <a classname="" href="http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Sensors/LightImaging/datasheetCR999.pdf" name="" target="_blank">Datasheet (ADJD-S311)</a>
        </li>
        <li>
          <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Imaging/adjd_s311_cr99_example.pde" name="" target="_blank">Example Arduino Code</a>
        </li>
        <li>
          <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Imaging/ADJD-S371-v11.zip" name="" target="_blank">Example PIC code</a>
        </li>
        <li>
          <a classname="" href="http://www.sparkfun.com/datasheets/Sensors/Imaging/ADJD-S371-v10-ARM.zip" name="" target="_blank">Example ARM code</a>
        </li>
        <li>
          <a classname="" href="http://bildr.org/2012/01/adjd-s311_arduino/" name="" target="_blank">Bildr Tutorial</a>
        </li>


moduleID: screwshield-v15
family: prototype shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino ProtoScrew Shield Kit
date: 2011-07-08
path: core/screwshield-v15.fzp
description:
<p>


	<strong>Description: </strong>The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=7914" target="_self">Arduino Protoshield</a>, including: a large prototyping space of both connected and unconnected 0.1&quot; spaced through-holes, a couple 5V and GND busses, a reset button, general use push button, and a 5mm yellow LED.</p>


<p>


	This product includes all the parts shown and comes in kit form and must be soldered together by the end user.</p>


<p>


	<strong>Kit Includes:</strong></p>


<ul>


	<li>


		1x ScrewShield PCB</li>


	<li>


		1x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9594" target="_self">5mm Yellow LED</a></li>


	<li>


		1x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8377" target="_self">330&Omega; Resistor</a></li>


	<li>


		2x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9280" target="_self">6-pin Stackable Headers</a></li>


	<li>


		2x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=9279" target="_self">8-pin Stackable Headers</a></li>


	<li>


		2x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=97" target="_self">Momentary Push Buttons</a></li>


	<li>


		6x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8084" target="_self">2-pin 3.5mm Screw Terminals</a></li>


	<li>


		8x <a href="http://www.sparkfun.com/commerce/product_info.php?products_id=8235" target="_self">3-pin 3.5mm Screw Terminals</a></li>


</ul>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/screwshield-v15.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://blog.makezine.com/archive/2011/04/blendophone-project-build-part-1.html" target="_blank">Maker Faire Project</a></li>


</ul>


moduleID: PowerDriver-Shield-v13
family: power shield
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Arduino Power Driver Shield
date: 2011-07-08
path: core/PowerDriver-Shield-v13.fzp
description:
<p>


	<strong>Description:</strong> This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.</p>


<p>


	The board provides 6 PWM outputs via screw terminals. Check the datasheet for the MOSFET below for full specifications on how much current this board can handle.This board is a very easy way to start using MOSFETS for your next high current project.</p>


<p>


	<strong>Note:</strong> If you want to stack another shield on top of this one, you will want to double-up on the stackable headers to clear the MOSFETs.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/PowerDriver-Shield-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/Arduino/PowerDriver-Shield-v12.zip" target="_blank">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Components/General/RFP30N06LE.pdf" target="_blank">Datasheet</a> (RFP30N06L)</li>


</ul>


moduleID: Rotoshield-1.0a
family: motor driver
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Snootlab
title: Rotoshield - Motor driver shield for Arduino
date: 2011-11-29
path: core/Rotoshield-1.0a.fzp
description:
	<div id="idTab1" class="rte"><p>Put your electronic assemblies in motion !</p>



<p>&nbsp;</p>



<p>A motor driver shield for Arduino Uno, Mega and Duemilanove.</p>



<ul>



</ul>



<p>&nbsp;</p>



<p>Use the integrated circuit L293DNE (Quad Half H-bridge) that provides 0.6A per bridge (1.2A peak) with thermal protection and kickback diodes integrated.</p>



<p>&nbsp;</p>



<p>DC motors from 4.5VDC to 20VDC</p>



<ul>



<li>Can control up to four DC motors individually controlled speed (256 levels)</li>



<li>Can control up to 2 stepper motors.</li>



</ul>



<p>&nbsp;</p>



<p>Features :</p>



<ul>



<li>4 bi-color LED to indicate the direction of rotation for each motor.</li>



<li>I2C bus used to minimize digital output pin used.</li>



<li>Only 4 Arduino PWM outputs and 2 analog input are used</li>



<li>Easy programming thanks to the library developed for this shield (see below).</li>



<li>Pull down resistors built to disable the motors during board startup.</li>



</ul>



<ul>



<li>2 screw terminals to simplify wiring to the motors;</li>



<li>1 screw terminal dedicated to motor power supply (anti-interference improvment).</li>



<li>ATX power supply header on the board. ATX 12VDC can be used for motor power by shorting dedicated solder jumper.</li>



<li>8 additional outputs available on 16 PWM intensity levels</li>



<li>Control sensors and outputs using the same shield.</li>



</ul>



<p>&nbsp;</p>



<p>Arduino reset button brought the shield.</p>



<p>&nbsp;</p>



<p>Compatible with Arduino Uno, Uno CMS, Duemilanove and Mega</p>



<p>&nbsp;</p>



<p><a href="http://shop.snootlab.com/attachment.php?id_attachment=43" target="_blank"><img style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px; border: 0px initial initial;" title="Assembly guide" src="https://shop.snootlab.com/img/p/87-340.jpg" alt="Assembly guide" width="210" height="78" /></a></p>



<p>Documentation and installation guide : <a href="http://shop.snootlab.com/attachment.php?id_attachment=43" target="_blank">link</a></p>



<p>&nbsp;</p>



<p>The official support forum: <a href="http://forum.snootlab.com" target="_blank">forum.snootlab.com</a></p>



<p>Example of derivative use of Rotoshield to control an output voltage, manage engine, etc.. on the forum.</p>



<p>&nbsp;</p>



<p>Library on GitHub : <a href="https://github.com/Snootlab/Snootor" target="_blank">link</a></p>



<p>Our libraries are available for Arduino and Arduino 1.0 (select the branche you want on the Git).</p>



<p>&nbsp;</p>



<p>Soldering kit comes in a reusable zip ESD packaging.</p>



<p>&nbsp;</p>



<p>Like all our products, this kit is RoHS.</p>



<p><img style="height: auto; font-family: Arial, Helvetica, sans-serif; color: #323232; list-style-type: none; list-style-position: initial; list-style-image: initial; padding: 0px; margin: 0px; border: 0px initial initial;" src="http://shop.snootlab.com/themes/matrice/img/logos_ext/RoHS-Logo.jpg" alt="" width="45" height="60" /></p>



<p>&nbsp;</p></div>



					<ul id="idTab9">



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=27">Topside Rotoshield.pdf</a><br />Topside Rotoshield</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=31">Manual Rotoshield FR.pdf</a><br />Assembly guide for Rotoshield FR</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=32">Library snootor.zip</a><br />Library snootor for Rotoshield</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=33">Schema Rotoshield.pdf</a><br />Schema of the Rotoshield</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=34">Eagle Rotoshield.zip</a><br />Eagle files of the Rotoshield</li>



					<li><a href="http://shop.snootlab.com/attachment.php?id_attachment=43">Manual Rotoshield EN.pdf</a><br />Assembly guide Rotoshield EN</li>



				</ul>



			 <!-- accessories -->



moduleID: jlpcb-089
family: carrier card
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Jean-Claude Wippler
title: Carrier Card expansion area
date: 2011-12-04
path: core/jlpcb-089.fzp
description:
The Carrier Card is a prototype board for use with the Carrier Board. This Carrier Card can be separated into two parts. Both parts have a series of +3V pins along their left edge and a series of GND pins along their right edge. All the header pins on the top row are labeled and connected to a free hole below. There's a mounting hole to fasten the right side to the center of the bottom ABS shell.


moduleID: LiPo-USB-Charger-v21
family: charger
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: USB LiPoly Charger
date: 2011-07-08
path: core/LiPo-USB-Charger-v21.fzp
description:
<p>


	<b>Description:</b> If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery.</p>


<p>


	The board incorporates a charging circuit, status LED, selectable solder jumper for 500mA or 100mA charging current, external LED footprint, USB input, mounting holes, and various holes for your own connectors. We include a single JST-tpye connector which connects directly to our LiPo batteries. The connector comes unsoldered, so you can use it or not.</p>


<p>


	There is also a &#39;SYS OUT&#39; which allows you to connect the charging circuit directly to your project so you don&#39;t need to disconnect the charger each time you want to use it.</p>


<p>


	<b>Documents:</b></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/LiPo-USB-Charger-v21(2).pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/LiPo-USB-Charger-v21(2).zip">Eagle Files</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/MCP73831T.pdf" target="_blank">Datasheet</a> (MCP73831T)</li>


</ul>


<p>


	<strong>Replaces:</strong> <a href="http://www.sparkfun.com/products/726" target="_blank">PRT-00726</a></p>


moduleID: Joystick-Breakout-v11
family: joystick breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Thumb Joystick
date: 2011-07-08
path: core/Joystick-Breakout-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This is the breakout board for the <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9032" name="" target="">thumb joystick</a>. Pins are broken out to a 0.1&quot; header and includes 4 mounting holes in the corners.<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span> 1&quot; x 1.25&quot;</p>


moduleID: Buzzer-v15
family: buzzer
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Buzzer
date: 2011-07-08
path: core/Buzzer-v15.fzp
description:
<p>


	<span style="font-weight: bold;">Description:</span> This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.<br />


	<br />


	<span style="font-weight: bold;"> Please note:</span> This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used.<br />


	<br />


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!<br />


	<br />


	<span style="font-weight: bold;">Dimensions:</span></p>


<ul>


	<li>


		20mm outer diameter</li>


	<li>


		Thin 0.8mm PCB</li>


</ul>


<p>


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-Buzzer.pdf" target="_blank">Schematic</a></li>


	<li>


		LilyPad Buzzer Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPad-Buzzer-08463.pdf" target="_blank">PDF</a></li>


	<li>


		All LilyPad Product Sticker Sheet <a href="http://www.sparkfun.com/marcomm/SFE03-0010-Packaging-LilyPadFPO-Stickers-MASTER.pdf" target="_blank">PDF</a></li>


</ul>


moduleID: ad5330 breakout-v11
family: dac breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: DAC Breakout
date: 2011-07-08
path: core/ad5330 breakout-v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>This is a simple breakout board for Analog Device&#39;s AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can operate from a 2.5 to 5.5V supply consuming just 115uA (at 3V).<br />


	<br />


	The DB0-7 pins, the parallel data inputs, are used to configure the analog output voltage. CS selects the device, and data is loaded into the input registers on the rising edge of WR. The GAIN pin allows the output range to be set at either 0V to VCC or 0V to 2VCC.<br />


	<br />


	Input data to the AD5330 is double-buffered, allowing simultaneous update of multiple DACs in a system using the LDAC pin. An asynchronous CLR input resets the contents of the input register and the DAC register to all zeros. The AD5330 also incorporates a power-on reset circuit that ensures that the DAC output powers on to 0V and remains there until valid data is written to the device.<br />


	<br />


	This breadboard friendly board breaks out every necessary pin of the AD5330 to 0.1&quot; spaced headers. The board includes a decoupling capacitor, but does not do any voltage regulation; voltage supplied to the board should be within the specified range.<br />


	<br />


	<span style="font-weight: bold;">Dimensions: </span>0.80 x 1.10&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/BreakoutBoards/ad5330%20breakout-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.analog.com/static/imported-files/data_sheets/AD5330_5331_5340_5341.pdf" name="" target="_blank">AD5330 Datasheet</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/tutorial/AD5330_Play_Wavs/AD5330%20Arduino%20Library.zip" name="" target="_blank">Arduino Library</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=160" name="" target="_blank">Tutorial</a></li>


</ul>


moduleID: Trackballer-v12
family: trackball breakout
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: Blackberry Trackballer Breakout
date: 2011-07-08
path: core/Trackballer-v12.fzp
description:
<p>


	<b>Description: </b>This is a breakout board for our <a classname="" href="http://www.sparkfun.com/commerce/product_info.php?products_id=9308" name="" target="">Blackberry Trackball</a>. The four spindles on the trackball have a tiny circular magnet the end; each of these are paired with an SMD hall effect sensor, which are used to measure up, down, left and right movements of the trackball. An SMD momentary switch is placed under the trackball to give you a select switch. The BTN line will be pulled low when the switch is pressed.</p>


<p>


	Also included on the Trackballer are 4 LEDs: red, blue, green and white. These can be powered to light the clear trackball up any color you can imagine.</p>


<p>


	All features are broken out to a 0.1&quot; pitch header. Regulated, 2.5-5.25VDC power must be provided to power the Hall sensors. The trackball is attached with strong CA glue. Board comes as shown, with all components populated.</p>


<p>


	The hall-effect sensors and trackball combo are surprisingly sensitive. A slight roll of the trackball creates multiple high/low transitions on the four axis pins, easily picked up by any microcontroller. A 360&deg; rotation of the trackball, along a single axis, will result in about 9 high/low transitions.</p>


<p>


	<span style="font-weight: bold;">Features:</span></p>


<ul>


	<li>


		Center select button</li>


	<li>


		360&deg; direction</li>


	<li>


		Hall effect sensors measure up/down/left/right movements of trackball</li>


	<li>


		Red, blue, green, white LEDs to light up the trackball</li>


	<li>


		All pins broken out to 0.1&quot; pitch header</li>


</ul>


<p>


	<span style="font-weight: bold;">Dimensions:</span> 1.1x0.85&quot;<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/Trackball-v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/Trackballer-v12-Eagle.zip" name="" target="_blank">Eagle Files</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Components/SPC00019AEB.pdf" name="" target="_blank">Hall sensor datasheet</a></li>


	<li>


		<a classname="" href="http://www.freescale.com/files/wireless_comm/doc/reports_presentations/eet_teardown_bbpearl_jan07.pdf" name="" target="_blank">Blackberry Teardown</a></li>


	<li>


		<a classname="" href="http://www2.electronicproducts.com/Research_In_Motion_-_BlackBerry_Pearl_8100-whatsinside_text-12.aspx" name="" target="_blank">Inside the Blackberry (BOM)</a></li>


</ul>


moduleID: 4d5dcc6408079f54cbda4d35e4d0b8fa
family: microcontroller board (basic stamp)
version: 4
fritzingversion: 0.3.17b.04.07.4081
author: Lionel Michel
title: BASIC Stamp 2p24
label: BS
date: 2010-04-08
path: core/BASIC_Stamp_2p24.fzp
description:
The BASIC Stamp 2p24 serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.


moduleID: LilyPad SimplePower-v13
family: power connector
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: LilyPad Simple Power
date: 2011-07-08
path: core/LilyPad SimplePower-v13.fzp
description:
<p>


	<strong>Description: </strong>The LilyPad Simple Power is a board that lets you connect a battery (or other power source) and switch it on or off, that&#39;s it! We provide you with a JST connector and a slide switch. You can solder in your own surface mount (or through-hole) resistor in line with the output, or solder the jumper closed if you don&#39;t require a resistor.</p>


<p>


	LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They&#39;re even washable!</p>


<p>


	LilyPad Simple Power is a design concepted by Felicia Williams of Boulder, Colorado.</p>


<p>


	<strong>Documents:</strong></p>


<ul>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad%20SimplePower-v12.pdf" target="_blank">Schematic</a></li>


	<li>


		<a href="http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad SimplePower-v12.zip" target="_blank">Eagle Files</a></li>


</ul>


moduleID: 045cef49a96039c64e7363608e127209
family: motor driver
fritzingversion: 0.7.0b.02.01.5801
author: David Thomasson
title: Dual VNH2SP30 Motor Driver
label: MD03A
date: 2012-02-05
path: core/Dual_VNH2SP30_Motor_Driver.fzp
description:
The Pololu dual high-power motor driver carrier for the VNH2SP30 motor driver integrated circuits from ST.





http://www.pololu.com/catalog/product/708


moduleID: NCP1400_5V_Step-Up_v11
family: power conditioning
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: SparkFun
title: NCP1400 Step-Up Breakout
date: 2011-07-08
path: core/NCP1400_5V_Step-Up_v11.fzp
description:
<p>


	<span style="font-weight: bold;">Description: </span>The NCP1400 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batteries) and output a constant, low ripple 3.3V output capable of sourcing up to 100 mA. This board is great for supplying power to 3.3V sensors or providing 3.3V from a a single AA battery.<br />


	<br />


	The breakout board includes the necessary peripheral components. The input, ouput and ground pins are broken out on a 0.1&quot; grid to allow easy access on a breadboard.<br />


	<br />


	<span style="font-weight: bold;">Documents:</span></p>


<ul>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/NCP1400_33V_Step-Up_v11.pdf" name="" target="_blank">Schematic</a></li>


	<li>


		<a classname="" href="http://www.sparkfun.com/datasheets/Prototyping/Batteries/Voltage_Switcher-NCP1400A-D.pdf" name="" target="_blank">Datasheet</a></li>


</ul>


moduleID: Real_Time_Clock_Module___DS1307_RTC_Breakout_Board
family: real time clock breakout
fritzingversion: 0.6.3b.08.16.5401
author: Mike
title: Real Time Clock Module - DS1307 RTC Breakout Board
date: 2011-09-07
path: core/Real_Time_Clock_Module___DS1307_RTC_Breakout_Board.fzp
description:
This a custom designed module for the DS1307 Real Time Clock. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST). The included Lithium coin cell battery (CR1225 41mAh) will run the module for a minimum of 9 years (17 years typical) without external 5V power. The DS1307 is accessed via the I2C protocol. We've written a test-bed to program the modules. This test-bed code should give you some insight on how to interface the module to any microcontroller using our example software I2C and BCD routines.











Features:











Two wire I2C interface 











Hour : Minutes : Seconds AM/PM 











Day Month, Date - Year 











Leap year compensation 











Accurate calendar up to year 2100 











Battery backup included 











1Hz output pin 











56 Bytes of Non-volatile memory available to user











Dimensions: 0.75x0.75" (20x20mm)























Documents:











RTC Module Schematic 











RTC Module Dimensional Drawing 











DS1307 Datasheet 











Wiring Example











Software: 











Example 16F88 code 











Arduino Tutorial. Thanks John Vaughters! 











Arduino Tutorial in Portuguese. Thanks Daniel Gonçalves! 











Bildr Tutorial


moduleID: jlpcb-128
family: microcontroller board (jeelabs)
version: 4
fritzingversion: 0.5.2b.02.18.4756
author: Jean-Claude Wippler
title: JeeNode wireless microcontroller
date: 2011-12-04
path: core/jlpcb-128.fzp
description:
The JeeNode is a low-cost combination of radio and microcontroller board. Think of the JeeNode as an Arduino + Xbee shield + Xbee, but smaller and less feature-full than the XBee. This is the through-hole kit, but the headers are pin-compatible with the JeeNode SMD, the JeeNode SMD, and the SMD Kit.


